thick a$$ lexan or plexi
#1
Our local Industrial Paints and Plastics wants all the rice in China to order a full sheet of nice big thick plexi. I need a chunk of a minimum of 1", preferably thicker of dimensions 41 1/16" x 18 3/8". Who can I contact in the lower mainland to blast out a piece of this size to me?
Mouunted to it on a shallow angle are the Eclipse Titanium 12's that will be bolted to it with the aid of a machined aluminum ring to go on the backside to keep the stuff from cracking.
Mouunted to it on a shallow angle are the Eclipse Titanium 12's that will be bolted to it with the aid of a machined aluminum ring to go on the backside to keep the stuff from cracking.
#2
Guest
Posts: n/a
call industrial plastics in surrey, i used to deal with a guy nameed carl, ask for him and see if they have a piece that they can hook you up with
#4
approx 600 and change for the sheet and 200 for the shipping and that is to us in lower mainland. youd have to come get it. takes 10 days to arrive from east. now im sure it cheaper if you lived closer to the location you get it from. 4 x 8 x 1 inch. we researched it out. and found that this is the better price for the amount of wait and shipping. found a shop that has it in stock lower mainland but its 900 and change. but ready to go and avaialble.
i personally couldnt find anyone that would cut any pieces out without charging you for the full sheet anyways. so paying for the sheet is pretty much the way to go and the cut is free. especially if it is just one or two cuts. with a full sheet you can double up and get 2 inch if you need. hope this helps out.
[ April 15, 2005, 01:12 PM: Message edited by: Team Shadow ]
i personally couldnt find anyone that would cut any pieces out without charging you for the full sheet anyways. so paying for the sheet is pretty much the way to go and the cut is free. especially if it is just one or two cuts. with a full sheet you can double up and get 2 inch if you need. hope this helps out.
[ April 15, 2005, 01:12 PM: Message edited by: Team Shadow ]
#5
Guest
Posts: n/a
PlasticWorks. They used to be the IPP in Surrey.
Excellent bunch of guys [img]graemlins/thumb.gif[/img] 604-501-9033
Excellent bunch of guys [img]graemlins/thumb.gif[/img] 604-501-9033
#6
Found and for $200.00 in the lower mainland. GE Polymer Plastic. 1-800-663-4122. They are a wholesaler. They will sell by the half sheet and in this case it seems they has some cuts for me that were close to the right size.
Thread
Thread Starter
Forum
Replies
Last Post
Pipes
General Discussion
12
07-14-2003 04:21 PM