toyota matrix set-up!
#1
toyota matrix set-up!
Hi i'm on this forum and I never post... My name is jean-philippe I,m from chicoutimi (quebec) (My english is not perfect but i try to do my best! so give my a chance!) :P i start car audio 3 years ago and i finally have a good set-up! i will try to post more on the forum hehe!
I begin with show you my set-up!
I have Alpine iva-w205 head unit with the pxa-h701 processor
front door speaker is the new cdt audio PSS-6IM with drt-26 tweeter on the dash!
speaker amplifier is a 4 channel SQA-4100 cdt audio amplifier!
subwoofer is 2x SSA Icon 12" D1 on a elemental design nine.1 amplifier i give 600watt rms on each sub for the moment! I build the subwoofer box myself and the amplifier racking But with this subwoofer i need a new racking because the box is to big! :P
my next step is to try to eliminate all the vibration in the car... (sorry again for my english hehe! :P)
I begin with show you my set-up!
I have Alpine iva-w205 head unit with the pxa-h701 processor
front door speaker is the new cdt audio PSS-6IM with drt-26 tweeter on the dash!
speaker amplifier is a 4 channel SQA-4100 cdt audio amplifier!
subwoofer is 2x SSA Icon 12" D1 on a elemental design nine.1 amplifier i give 600watt rms on each sub for the moment! I build the subwoofer box myself and the amplifier racking But with this subwoofer i need a new racking because the box is to big! :P
my next step is to try to eliminate all the vibration in the car... (sorry again for my english hehe! :P)
#10
haha yea its likely a good idea you might want to do the wire from your positive on your alt, to the pos. on your battery and a fat ground from your motor to frame, (Big Three) just curious but does that battery have side posts to ??/