Ummm....
#12
I wish i read this a little sooner. I just orderd the peice. It's going to bu a fused plexi port that will be in my viewing window. The port will be 6"x4"x14". Thats what winisdPro gave me to produce a good low end with a ver flat response. I know the plastic guy so he only charged me $20 for the materials and the work. I was pretty happy since I was told by some installers that it would be over $100.
#13
Oh well. I'm sure It'll work for ya. A PG sub like that wouldn't move as much air as say a stroker or an Eclipse Ti, but it should be a good performer. After all, the box design looks to be for SQ rather than SPL.
#14
Guest
Posts: n/a
Originally posted by Chadxton:
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig
#15
Originally posted by Dukk:
psst - he was talking 3" diameter round ports that were 8.5" long That's only a hair over 7sqin per vent.
psst - he was talking 3" diameter round ports that were 8.5" long That's only a hair over 7sqin per vent.
#16
Yeah, it's going to be an SQ set up that I hope will get loud when I want it to. It's a daily driver so I just want it to sound good. It should be loud considering I thought my 10" xmax with 200 watts loud. Now I have a 15 with 500! I should be very happy!
#18
Originally posted by Dukk:
</font><blockquote>quote:</font><hr />Originally posted by Chadxton:
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig
</font><blockquote>quote:</font><hr />Originally posted by Chadxton:
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig