Lessy

DRAFT 1

Pro Wall

• No battery limit
• No capacitance limit
• No amplification limit

Competitors will be divided into following classes based on the cone area:

1 – 510 square inches (Pro Wall A)
511 + square inches (Pro Wall B)

Other Regulations

• box has to be located behind the A-pillar
• no interior modifications front of A-pillar
• all seats may be removed from the vehicle
• battery running voltage may not exceed 18 volts
• aftermarket alternators and batteries are allowed


SPL Measurement

• competitor goes through a 30 second run where that competitor's peak spl is measured
• microphone can be placed anywhere on the windshield
• windows may not be open
• doors may not be open
• trunk/hatch and hood of the vehicle may not be open
• competitors are permitted to use any recording materials at their disposal

JordyO

iTrader: (17)

I think you guys have got your "pillars" mixed up.

The A pillar is the one that holds up the windshield. The B pillar is the one located back by the front seats.

If you're allowed to have a wall up to the A pillar then the vehicle would be nearly impossible to drive

(I'm sure you'll get some pretty crazy scores though!)

Lessy

Sry bout that Richard

And JordyO you're right, it should be B-pillar [img]graemlins/thumb.gif[/img]

Prolifik

iTrader: (7)

DRAFT 1

Pro Wall

• No battery limit
• No capacitance limit
• No amplification limit

Competitors will be divided into following classes based on the cone area:

1 – 510 square inches (Pro Wall A)
511 + square inches (Pro Wall B)

Other Regulations

• box has to be located behind the B-pillar
• no interior modifications front of A-pillar
• all seats may be removed from the vehicle
• battery running voltage may not exceed 18 volts
• aftermarket alternators and batteries are allowed


SPL Measurement

• competitor goes through a 30 second run where that competitor's peak spl is measured
• microphone can be placed anywhere on the windshield
• windows may not be open
• doors may not be open
• trunk/hatch and hood of the vehicle may not be open
• competitors are permitted to use any recording materials at their disposal


The official name is likely goin to be Canadian Bass Off League . Any other suggestions are welcome

[ February 17, 2005, 09:24 AM: Message edited by: Prolifik ]

Lessy

How about Canadian Extreme Sound League (CESL) or (CXSL)???

JohnnyToronto

iTrader: (2)

Ya but yours isn't really a Canadian SPL league considering you ONLY want your customers to compete, and people that can hit real scores aren't encouraged to attend.
But regardless...

[ February 17, 2005, 03:15 PM: Message edited by: JohnnyToronto ]

Prolifik

iTrader: (7)

good call JohnnyToronto

Lessy the name needs to be plain and simple. I dont like all the "Extreme" stuff, doesnt really say anything

Lessy

All I was suggesting a better name. Plus the average person won't kwow what SPL is anyway, so how is that "plain and simple" [img]graemlins/2xblown.gif[/img]

Xtreme Sound can be easily understood better than SPL, and way better than Bass off IMO

Ken (AUDIOBAHNBOY) Lambert

I think the mic should placed like normal.And use the old mic with the audiocontrol! hehe....