I've got a dillema. I'm building a big box, and I can put either 2 x 12" subs, or 1 x 15" sub in it, but not both as I would like. I want to make the maximum SPL. The box will be ported, obviously. I'm driving it with a class D amp which is rated at 1500 watts x 1 @ 14.4v, 1185 watts x 1 @ 12.5v. Either way, my 15" sub is an oldschool Cerwin Vega Stroker 15" dual voice coil which will be setup in parallel for 2 ohm load. My 2 x 12"'s are also oldschool JBL GTi1200 1000watt (600rms) 4 ohm, which will also be wired to 2 ohm load.. I'm using 1/0 gauge for power with multiple batteries and caps, but it's not relevent. The 15" put's out a bigger sine wave, however the 2x12"'s would have a larger surface area, but slightly smaller sine wave.. I just dunno which one would be best for max SPL? I'm leaning towards the 2x12"'s..

So which is better? 2x12", or 1x15"??

 

why not build 2 boxes and see which one is louder.....

 

2 12's.

 

What do you mean a bigger sine wave?

 

If you are going strictly SPL, 2 12's

 

go with the pair of 12's

 

i think the stroker would be louder than the gti s

 

there is no replacement for displacement

 

Spl wise, go with the pair of 12"s

 

from personal expierience, 2 12 with less power... louder then 1 15 with more power.