aeroport in canada
#11
The pipe is not an air core pipe with a large diameter wall, the wall is solid abs and is about 1/16 inch thick at best to match with the small insert end of the aeroport end bell. I may have some extra 3" and 4" pipe laying around for the Aeroport ends, send me a pm and let me know what you need.
#12
Internal diameter is 4" but that is not how these go together. There is a connecting ring that goes around the outside of both the port tube and the flared end. So its the outside diameter that makes all the difference.
Yuli, I have ask them a number of times and there just isn't a demand for them yet. Get me a order of 100+ Kits and I could maybe pull some strings.
Yuli, I have ask them a number of times and there just isn't a demand for them yet. Get me a order of 100+ Kits and I could maybe pull some strings.
#14
yes I was the first person in Canada to deal with this company to my knowledge...I asked them a long time ago about 6" ports and they said it was not enough demand...what thery don't realize is there is a huge demand for them...and yet they make 2" aeroports and 3" aeroports which probobly have a heck of alot less demand then 6" do...if anyone wants 6" aeroports though they are made by Lightning Audio...however they are like really expensive and you have to go out and find pipe for it because they are sold as just flares
#16
Ok guys, got some pricing on the tubes and can get them without problem. They are 48" lengths although I have to see if that is feesable to ship. I really need to know what the interest is in these.
Yuli, if you are serious about 100+ let me know, I am pestering them now to see what is would take as an order to product a 6" version.
Yuli, if you are serious about 100+ let me know, I am pestering them now to see what is would take as an order to product a 6" version.
#17
Guest
Posts: n/a
For 6" PNR Aeroports you use 6" PVC pipe and rabbet it at the ends. I've used them before - gotta like a vent that is over 10" diameter at the outer flare [img]graemlins/thumb.gif[/img]
If the PSP ends butt joint to the pipe then really it wouldn't be hard ot use any pipe, some glue, and a little 'glass...
If the PSP ends butt joint to the pipe then really it wouldn't be hard ot use any pipe, some glue, and a little 'glass...