amp question...
08-23-2008, 03:13 PM
#1
50 Watt CAFz'r
Thread Starter
Join Date: May 2007
Posts: 77
amp question...
so ive gone ahead and put my order in for 2 loaded 18" btls and now ive come to the amplifier dilemma, been looking at either 2 saz-3000'ds or 2 t40001bd's, already have dual 250 amp alts and 3 powermaster d3100's as well as a ridiculous amount of 0gauge, power isnt a concern, $$ somewhat, would like to keep my amp purchase below 3500, any suggestions? thoughts?
08-23-2008, 04:23 PM
#2
how does this sound.Autotek MM 4000.1D Amp: Mono
this is my plans for my next setup with some Fi or TFones
this is my plans for my next setup with some Fi or TFones
08-23-2008, 04:28 PM
#3
50 Watt CAFz'r
Thread Starter
Join Date: May 2007
Posts: 77
i have my doubts that that would even put out its rated power haha
deffinatly not one for autotek, or hifonics, crunch etc
just because some of the amps can put out power
doesnt mean its clean power
deffinatly not one for autotek, or hifonics, crunch etc
just because some of the amps can put out power
doesnt mean its clean power
Last edited by oakley1984; 08-23-2008 at 04:31 PM.
08-23-2008, 05:25 PM
#5
50 Watt CAFz'r
Thread Starter
Join Date: May 2007
Posts: 77
www.ficaraudio.com <- go n find out 
08-23-2008, 06:30 PM
#6
Autotek Mean machine amps are a very strong performer. The4000.1 will put out its rated power. Out of the 2 you are looking at i would say the SAZ would be a good choice. Even though they will not put out the power the bd's will.
08-23-2008, 06:59 PM
#8
^^^ Just email them with a postal code and they will quote you on what you want. And oakley have you thought of a XXV Sampson 8000 @1 ohm @14 volt, and over 10000 @1 @ 18 volt. Could pick one up for the half the price of 2 of the amps stated above, very solid amp.
