Which would be the smartest way to face my box for my blazer

3 PG Ti 10's are going into it @ 2.55 cubic feet with either (3) 3" round ports 13.5" long, or a single 3"x7" slot port 13.5" long not sure yet as per Phoenix gold's suggestion

I have decided that I dont want a back seat since its a 2 door. the seat isnt in good shape and I want the trunk space.

I want to make the box into the floor (the bottom will be fiberglass. now I could fire the subs basicly anyway. Up forwards backwards towards the rear glass or 2 one way 1 the other I have the room to do anything I have PLENTY of space.
Btw what way should I aim the ports?

Thanks for the help

 

This what I kind of had in mind the three subs in a triangular formation straight up with a 3x7 aimed port forward between the seats

most people aim for the back window but most of them dont completely remove the seat either with the seat removed and the box in there it will look like the seat is folded down or something like that it wont look like a sub box

Does anyone see a problem with the way I am thinking of doing it? or is there a better way?

 

I will take some pics tomorrow

 

I took a few pics of the interior But I need a host

I decided to go with 4 10's now because that way I can either go with a 1 ohm load with one amp
or 2 2 ohm loads on two amps

 

is there anyway to attach pics to the post?
otherwise i am in need of a host

 

to attach pics to a post they need to be already hosted somewhere

 

www.sounddomain.com/id/mycyl20

as u seem em is how i used em. drivin an 89 pathy the best way i found to fire the subs was to have em about 1/2 a foot away from the rear hatch with the port facing the same way. but thats a pathfinder and thats just the best way i could find. ull probably find it better a diff way. just my 2 cents.!!!!!