Battery in my camera is dead no Lanos pics today.
After a few measurements I think I'll need to use a slim battery like Kinetik or batcap. Any recommendations on either?
Will 7 cubes be enough for a 18" apx?

 

7 cubes should be plenty. especially if you're able to use external aeros

 

APX deal fell through so I've ended up with a couple of quad 15" CSX's. Anyone have any comments or recommendations on the CSX ?
Planning the same deal four T3-1000's running a coil each, street c in a 2001 Lanos.
Here's pics of our new subs.

 

i think thats nowhere near enough power for that sub. The reason nobody uses the CSX is because the suspension is extremely stiff...need mega power to get the most out of them.

 

One T3-1000d running 1.5 ohm on each coil won't be enough power?

 

nope...those amps dont put out very much power at any load.

 

Well I'll be sure to let you know how it goes.

 

Battery, caps, PRA-H400, Earthquake Phase 4, four T3-1000d's jammed in so far.

I've only got around 4 cubes after driver and port displacement for his CSX 15"
I'm considering two triangular ports firing close to the back seat out to the sides
to help eliminate any chance of cancellation that may occur from the gaps beside the cabinet.
Sub firing up centered.
Look at this crazy thing it looks like there isn't much room between the roof and the backseat.

I'll be knocking together the enclosure next week so if you have any suggestions
please let me hear them.

 

I'll be knocking together the enclosure this week so if you have any suggestions
please let me hear them.

 

I have no suggestions however, it sures looks impressive.