Db drag reg's
#1
Db drag reg's
ok so im in the process of settin up my rex for either SM 1-2 or SS1-2, and am piecing my car back together....long story......now as i understand it, in those classes and under from the B piller forward it has to be OEM, or equivilent replacement, so far I've had a tough time trackin down a dash plastic for where the deck and comfort controls go!!
so i was thinkin i'd make one out of fiberglass? would that be accepted as a replacement? or bump me to extreme?
I would keep it the same thickness as stockers!!
also the same with the b pillers, i have the rear quarters in, but the lowers, the pc that covers the seatbelt pully is Awol!! so can i leave it or do i need to cover those as well, those are the last few things i need to finish before i actually start the build build!!
someone shed some light here!!!
so i was thinkin i'd make one out of fiberglass? would that be accepted as a replacement? or bump me to extreme?
I would keep it the same thickness as stockers!!
also the same with the b pillers, i have the rear quarters in, but the lowers, the pc that covers the seatbelt pully is Awol!! so can i leave it or do i need to cover those as well, those are the last few things i need to finish before i actually start the build build!!
someone shed some light here!!!
#2
everything behind the b pillar can come out , except the plastic peice that is just under the rear hatch , as far as the plastic dash peice goes if ur taking about the entire counsol were the cd player sits im pretty sure that needs to be stock , or atleast the same thickness as a stock unit , the seat belts can come out in those classes if the vehicle is trailored otherwise they stay in
so your building for either street max or ss 12 ?
so your building for either street max or ss 12 ?
#4
everything behind the b pillar can come out , except the plastic peice that is just under the rear hatch , as far as the plastic dash peice goes if ur taking about the entire counsol were the cd player sits im pretty sure that needs to be stock , or atleast the same thickness as a stock unit , the seat belts can come out in those classes if the vehicle is trailored otherwise they stay in
so your building for either street max or ss 12 ?
so your building for either street max or ss 12 ?
and ya i meant the entire console where the deck goes, i found one in kelowna, but it was cracked in half, i might go back and get it and fix it!!
and which pc under the hatch do you mean, right underneath where the hatch latch is, or do you mean the rear quarters where the side windows are?
#5
ya id suggest getting that counsol and fixing it forsure that will be a needed oem part , im talking about the rear hatch cover in the glass window thats a must and the hatch covers that fit around the rear windows and the hatch the other stuff in the back under the window line can come out and the lower part your talking about if its the shelf just behind the b pillar then yes that can come out also
#6
and ya im think im going for SM 1 2 or SS 1 2, but i definatly wont be competative this year, just focusing on gettin it back together and thumpin, if i get my beat in this yr cool, but if not, im just gonna be runnin my 12" L7 off a 2 KW amp!!!
too many projects, gotta learn to commit to a single hobby!!!
too many projects, gotta learn to commit to a single hobby!!!
#10
P.S. that is with the exception of ss no wall.