Help with enclosure
#1
Help with enclosure
Hey everyone just have couple quick questions, i am about to buy these subs along with an amp and a box, just curious if the box will be big enough for the subs inorder to them to pound.
2 X 12" Subwoofers (KFC-3514 DVC) - 380RMS approx.
AMPLIFIER - KAC-X812D
Box; bassworx
GPH212BK Dual 12" slot port, port trim, high gloss baffle - BLACK
2.8Volume (Cu ft)
38Tuning (Hz)
Subwoofer Specifications
* Size: 12 inch
* Rec. Sealed Box Dims: 1.20 - 1.20 cu. ft.
* Rec. Ported Box Dims: 1.70 - 1.70 cu. ft.
* Free Air Usage: not recommended
* Sensitivity: 93 dB
* Frequency Response: 25-800 Hz
* Recommended RMS Power: 380-760W
* Peak Power Handling: 1,500W
* Impedance: dual 4 ohms subwoofer wiring options
if the box is slighly smaller then it should be, is that for the better or worse?
also anyone femiliar with the kenwood subs? can this system pound hard? hows teh quality etc, any help apriciated! thanks
2 X 12" Subwoofers (KFC-3514 DVC) - 380RMS approx.
AMPLIFIER - KAC-X812D
Box; bassworx
GPH212BK Dual 12" slot port, port trim, high gloss baffle - BLACK
2.8Volume (Cu ft)
38Tuning (Hz)
Subwoofer Specifications
* Size: 12 inch
* Rec. Sealed Box Dims: 1.20 - 1.20 cu. ft.
* Rec. Ported Box Dims: 1.70 - 1.70 cu. ft.
* Free Air Usage: not recommended
* Sensitivity: 93 dB
* Frequency Response: 25-800 Hz
* Recommended RMS Power: 380-760W
* Peak Power Handling: 1,500W
* Impedance: dual 4 ohms subwoofer wiring options
if the box is slighly smaller then it should be, is that for the better or worse?
also anyone femiliar with the kenwood subs? can this system pound hard? hows teh quality etc, any help apriciated! thanks
#2
how hard to u want it to pound? if you really crank it maybe you will be heard half way thru the parking lot at bayview and 16th timmies, but you probably wont win any competitions with it.
there is really no specific box size that it should be, so yes it can be smaller, or bigger it doesnt matter. manufacturer specs mean nothing when it comes to box size.
there is really no specific box size that it should be, so yes it can be smaller, or bigger it doesnt matter. manufacturer specs mean nothing when it comes to box size.
Thread
Thread Starter
Forum
Replies
Last Post
wasted911
General Discussion
7
05-04-2017 08:40 PM
unknown123
Car Audio For Sale
2
02-01-2012 10:56 PM
mittal
Enclosure Design & Construction Help
11
02-16-2005 08:17 PM