Hey everyone,
Is it ok to run 2 subs in a single enclosure...?
Im looking at runing 2 comp vr Kickers 12's ( min 1.75 ported, max 2.25 ported ) I am lookin at runing a single enclosure, specs i have are 30inches wide 24inches deep and 14inches high, with 3 aero ports, 12inches in, 4inches around, Will all this match up or do i need to alter my box measurements, I cant change the Width of the box due to space issude, thanks if yall dont mind helpin me out i'd greatly appreciate it, Id like to have around 2ft ported i guess. I dont know n e thing about the networks i can hook up and hafe the local shops arnt much help and just make u mad b4 u leave... If yall could help i'd greatly apreciate it!

make a box like this 14 tall 27 wide and 21 deep, all external dimentions. this will give u 1.8 cubes per sub.

just makesure u have some room between the hatch and the ports

http://www.cardomain.com/item/LITPNR4BKPT
OK so that box with 3 of those ports. will be fine...
Also will i have cancelation, and will it be oke if i run a 3/4 sheet on the inside to brace the Ports on the inside of the box or will that hurt the box performance, cuz wouldnt the Screws in the ports affect there performance a lil and it wouldnt look good!?
Thanks sorry im being hard ta work with im just trying to get this **** PERFECT ya know and i was hearing that box would be to big!

ok that box is 1.8 for each sub b4 ports, what would i do about the ports want they take away from my overall volume of the box?! ???? ( i never woulda amagined this **** would be dis hard )

u dont need to brace anything inside, just makesure your box is glued and screwed well. ports will be fine too. u just put them at the very bottom of the box so the inner flare will actually sit on the floor of the box

Hey man need another box build up... I got a L5 today 12inch 600 Rms needs like 1.75-3.25 so if u dont mind figurein up a box that'll make 2.25 or so ported....! I'd greatly aprreciate it... only 3oinces wide

the box pic i send u pm is about 2.3 cubes

I got a box that was ported to 31hz that is 2.35 total cu.ft with a port that is 3" wide round 7.03"long with the areo ports

Trk for an L5?

USE BASSBOX! it is the best thing for a subwoofer since the amplifier (^_^)
amazing program, no screw-ups, and you can see exactly how it going to perform and sound before you even touch the wood. Download it free (from me probably) on Limewire (fileshare)