installation guide cable car audio system head unit
#1
installation guide cable car audio system head unit
For installation of the head unit. The main thing is to release the head unit from the dashboard of the car, using the opening of the plastic. Do not use a screwdriver can cause blisters blindly car dashboard. remove the head unit and disconnect the cable socket. replace the standard head unit with an aftermarket head unit. To determine which speaker cables, you can use the battery rocks. then connect the cable to the battery stone. while searching for the cable to stun acc, negative cable, and the cable can use your stun batteries tespen, looking Accu Cable stun, if tespen lamp light means the cable is a cable Accu, if you connect the cable to the tespen. turn the ignition on psisi acc. if the lights on when the car ignition live. and tespen will die if the car ignition is turned off berarati the cable is a cable acc. practical way to search for stun cables and speaker cables.
Thread
Thread Starter
Forum
Replies
Last Post