now jackass....once your done screwing around, get to work doing it right.
I know your just screwing around so being called a jackass shouldnt hurt too much lol

 

lol ya thats about it barty were going to test the big square port tonight then the real build starts back seats coming out just like the white cavi build

 

well the new box is on the building block and should be ready to put in the car tonight.So there will be some new pic's posted and some number's.This box is the front facing box with a single 12 that will be power'd by a sony 2002 gtr lets see where the number's go from here lol

 

 

Lookin good Tim, where's them numbas?

 

not too bad... just seems a bit low on port area for SPL facing forward.
whats the tuning?
i love your clean glue joints lol

 

im going to say its right around 30hz.....it will sound awesome on the 600watt amp! for max spl, I think the port will have to be larger with less length but its still going to rock as is!!!

 

thanks guy's its not much work to tune when the port is small but when you start off big its a bugger to re face the box to make the port smaller after its in the car lol.all the glue was cleaned up after the pictures lol as for what its tuned at the port calculater i used says 40hrz so we will see how acurate it is lol the ports 5x14x30 if i remember right so we will see tonight what its going to work like.Wolfman and i are testing as soon as were free from the days BS lmao

 

here's some testing pic's from last night i said i would post



first burp @44 hrz got me this




we then pulled the box out and took an inch off the port and that got us some gains




then bart showed up and says when was the last time you had the car running so we fired up the car and that brought us to these numbers



so all and all i would say i did an alright job on that box lol tonight were going to take some more port off and see were that gets us

 

more port more port more port.lol good job cavi.