MTA

iTrader: (1)

is the port opening wider than the depth of the box? ( new depth )

XquisitesoundZ

HMMM not sure I will measure it Peter what by chance if it is I should shrink the port down? Its gona be very close

MTA

iTrader: (1)

well you just dont want your port opening to be wider than the depth of your box otherwise it will not work as a proper port... it will actually choke the flow to a certain degree

XquisitesoundZ

Ok thanks Peter I will look at this bro hmmm if thats the case I could get a sono tube and cut it to fit on the baffle and then I rounded the baffle as well as cut port down. Thanks you guys are the best so much to learn lol.

XquisitesoundZ

Ya so the port was 3" wider than the depth Peter so Im gona close it off to 750sq" bro thanks for all the advice everyone keep it coming please lol.

XquisitesoundZ

So thanks to all the great advice from you guys I found my port was wider than the depth of my box so I am shrinking it down, I braced the baffle with a 2x4 and 2x2 didnt have a 2x6 lol but then I went and got a tube. I cut it open to wrap my baffle as it stands this would make my port 705sq" so I am goin to cut it some more to get it closer to 750sq". Just got to get some 1" MDF gona make the back wall 2" thick.

Mach5

nice, how about that bunch of 2x4s? is that really necessary?

MTA

iTrader: (1)

like he said earlier... hes putting in a new back baffle to make the box smaller

DeadlySones

iTrader: (4)

Nice man, that should help a little.

Mach5

Oh nice, now we are talking!

Should be much louder than that BP6