Favorite Xover/eq
#5
I would like to get one that I can use for highs/ mids/ sub bass/ and subs and the only one I actually seen that will do all 4 was a PPI 4/5/6(I think thats what it was called?)But I dont really know if it was good or not.
Any other suggestions for this? Where can you go to look at these things in the Maple Ridge or surrounding area? Any one sell Audio Control locally?
Thanks for the replies.
Any other suggestions for this? Where can you go to look at these things in the Maple Ridge or surrounding area? Any one sell Audio Control locally?
Thanks for the replies.
#6
Guest
Posts: n/a
alpine pxah700/701
Features:
General-Processors, EQ's and Crossovers
11-Band Digital Parametric EQ
4 Bands Front, 4 Bands Rear, 2 Bands Center, 1 Band Subwoofer
17 Band Digital Parametric Equalizer
31-Band Graphic Equalizer
4 Volt PreOut
6 PreOuts
6 User Programmable Presets
6/12/18/24/30dB/OFF Selectable Crossover
Adjustable Center Delay
Ai-NET or RCA Inputs
Auto Time Correction
Digital Time Correction
Dolby Digital®, Dolby Pro-Logic® and DTS® Decoding
Gold Plated RCA Jacks
Independently Adjustable Channel Level
MDAC Digital to Analog Converter
Manual Time Correction
MediaXpander™
Microphone Included
Navaigation Mix Input
Rear Mix Capibility
S.T.A.R. Circuitry
Selectable Listening Modes
Standard/Maximum/Late Night
Speaker Selection Mode
Front: Large/Small
Center: Large/Small/Off
Rear: Large/Small/Off
Subwoofer Level Control
Specs:
General-Processors, EQ's and Crossovers
Band 1 : 20/22/25/28/31.5/36/40/45/50/56/63/71/80 (Hz)
Band 1 : 20/22/25/28/31.5/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500 (Hz)
Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200 (Hz)
Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k (Hz)
Band 3 : 125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)
Band 4 : 315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)
Band 5 : 800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20k (Hz)
Channel Seperation : 80 dB
Controller Size (WxHxD)in : 6-3/4” x 1-13/16” x 1”
Controller Size (WxHxD)mm : 170mm x 46mm x 25.7mm
Controller Weight : 159 g (5 oz.)
DAC resolution : MDAC (Multi-level DAC) 26kHz /24dB
Frequency Response : 20Hz—20kHz (±1dB)
Input Impedance : Greater Than10k ohms
Input Sensitivity : 850mA (2V for analog 1 only)
Main Chassis Size (WxHxD)in : 10-3/16” x 1-9/16” x 6-1/4”
Main Chassis Size (WxHxD)mm : 260mm x 40mm x 160mm
Main Chassis Weight : 1.1Kg (2lbs. 6 oz.)
Number of Bands : 17 bands (5 Front, 5 Rear, 5 Center, 2 Subwoofer)
Number of D/A Converters : 8
Number of Presets : 6 (User Selectable)
Number of outputs : 8 (2 Front1 L/R, 2 Front2 L/R, 2 Rear1 L/R, 1 Center, 1 Subwoofer)
Output Impedance : Less Than 1k ohms
Output Voltage : 4V (with 10 k ohms load)
Parametric Eq “Q” Factor : 0.5/1.0/2.0/3.0/4.0/5.0
Parametric Eq Boost/Cut Range : ±9dB in steps of 1dB
Power Requirement : 11—16V DC (negative ground)
Signal to Noise Ratio : 110 dB (Digital Optical In)
Subwoofer Crossover Frequency : 20 - 200Hz (1/6 Octave steps)
Subwoofer Crossover Slope : 6/12/18/24/30dB
Subwoofer Level Control : 0 to +15dB
Time Correction Control Range : 0—20ms (0.1ms steps)
Total Harmonic Distortion : 0.02%(at 1kHz)
Features:
General-Processors, EQ's and Crossovers
11-Band Digital Parametric EQ
4 Bands Front, 4 Bands Rear, 2 Bands Center, 1 Band Subwoofer
17 Band Digital Parametric Equalizer
31-Band Graphic Equalizer
4 Volt PreOut
6 PreOuts
6 User Programmable Presets
6/12/18/24/30dB/OFF Selectable Crossover
Adjustable Center Delay
Ai-NET or RCA Inputs
Auto Time Correction
Digital Time Correction
Dolby Digital®, Dolby Pro-Logic® and DTS® Decoding
Gold Plated RCA Jacks
Independently Adjustable Channel Level
MDAC Digital to Analog Converter
Manual Time Correction
MediaXpander™
Microphone Included
Navaigation Mix Input
Rear Mix Capibility
S.T.A.R. Circuitry
Selectable Listening Modes
Standard/Maximum/Late Night
Speaker Selection Mode
Front: Large/Small
Center: Large/Small/Off
Rear: Large/Small/Off
Subwoofer Level Control
Specs:
General-Processors, EQ's and Crossovers
Band 1 : 20/22/25/28/31.5/36/40/45/50/56/63/71/80 (Hz)
Band 1 : 20/22/25/28/31.5/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500 (Hz)
Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200 (Hz)
Band 2 : 50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k (Hz)
Band 3 : 125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)
Band 4 : 315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)
Band 5 : 800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20k (Hz)
Channel Seperation : 80 dB
Controller Size (WxHxD)in : 6-3/4” x 1-13/16” x 1”
Controller Size (WxHxD)mm : 170mm x 46mm x 25.7mm
Controller Weight : 159 g (5 oz.)
DAC resolution : MDAC (Multi-level DAC) 26kHz /24dB
Frequency Response : 20Hz—20kHz (±1dB)
Input Impedance : Greater Than10k ohms
Input Sensitivity : 850mA (2V for analog 1 only)
Main Chassis Size (WxHxD)in : 10-3/16” x 1-9/16” x 6-1/4”
Main Chassis Size (WxHxD)mm : 260mm x 40mm x 160mm
Main Chassis Weight : 1.1Kg (2lbs. 6 oz.)
Number of Bands : 17 bands (5 Front, 5 Rear, 5 Center, 2 Subwoofer)
Number of D/A Converters : 8
Number of Presets : 6 (User Selectable)
Number of outputs : 8 (2 Front1 L/R, 2 Front2 L/R, 2 Rear1 L/R, 1 Center, 1 Subwoofer)
Output Impedance : Less Than 1k ohms
Output Voltage : 4V (with 10 k ohms load)
Parametric Eq “Q” Factor : 0.5/1.0/2.0/3.0/4.0/5.0
Parametric Eq Boost/Cut Range : ±9dB in steps of 1dB
Power Requirement : 11—16V DC (negative ground)
Signal to Noise Ratio : 110 dB (Digital Optical In)
Subwoofer Crossover Frequency : 20 - 200Hz (1/6 Octave steps)
Subwoofer Crossover Slope : 6/12/18/24/30dB
Subwoofer Level Control : 0 to +15dB
Time Correction Control Range : 0—20ms (0.1ms steps)
Total Harmonic Distortion : 0.02%(at 1kHz)
#9
Analogue: Zapco SLX-4, Tru F2A.
Keep in mind the Alpine (nice piece by the way) appears to require an outboard controller (or Alpine H/U). Biggest reason why I can't use it.
And you may want to avoid the required A/D - D/A conversions that digital eqs require. This inevitably causes losses (whether you will hear them is another question). Now if you can run digital in (such as from an Alpine H/U to the 700/701) then this issue goes away...
[ July 22, 2005, 11:22 AM: Message edited by: sac ]
Keep in mind the Alpine (nice piece by the way) appears to require an outboard controller (or Alpine H/U). Biggest reason why I can't use it.
And you may want to avoid the required A/D - D/A conversions that digital eqs require. This inevitably causes losses (whether you will hear them is another question). Now if you can run digital in (such as from an Alpine H/U to the 700/701) then this issue goes away...
[ July 22, 2005, 11:22 AM: Message edited by: sac ]