Hey just a quick one. What size fuses should be used in the following.

- The fuse holder that goes right on my main power wire, from my battery.

- And lastly, what size fuses to use on my Gold Quest Distrubition Block. I will be running the 4g main power wire, to split into two 8g wire to run to my amps.

 

I'd use 80-120 amps for the main line under the hood, since the fuse there is only to protect your car from short circuits.

in the fuse holder, I'd use probly 40A for each wire.

 

i would also add one at your split (if you go to a show and do not have one there you will not get points )

 

Might wanna put a slightly larger fuse in for ur sub amp, if its a high current amp......but see if you can blow the 40 lol

 

I hope you're not implying the fuse directly in the amp...

Mark

 

yeah thats never a good idea... and if you decide to going up by even another 5 amps is iffy.

 

^^^

the manufacturer puts a 40amp, (or whatever) in them for a reason.

Mark

 

although 40's are hard to come across if you do pop em... bestbuy selles em for last time i checkked 11 bucks for 2.
installer buddy jeff gave me 10, he basically threw em at me lol and said our cost is about 60 cents each after shipping lol.

 

lol stupid insane mark up!!

 

yeah no doubt.