How to connect 2 amps ?
#21
Originally Posted by JeffersonC
Split my Single RCAs to run to each amp wont help, because my LA 290 has 4 RCA input holes, ( 2 sets, 4 channels )
I think I may try with the converter, and if the low freq's are very noticeable, then I will get a crossover.
Edit. This is the crossover I would need http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=15881
I think I may try with the converter, and if the low freq's are very noticeable, then I will get a crossover.
Edit. This is the crossover I would need http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=15881
If you need all 4, RCA splitters could be used.
The converter is a waste of time and money, just pick up a cheap crossover.
You'll more than likely want a crossover for your sub amp as well anyways.
#22
I told you about 20 posts ago that i have a Kicker crossover. It splits signal between my subs and 6x9's. I paid 100, i'll sell it for 50.
let me know if you would like to see or here it work, then i'll tak it out. I won't need it when i get my new HU Installed.
let me know if you would like to see or here it work, then i'll tak it out. I won't need it when i get my new HU Installed.
#25
Originally Posted by Dukk
You may get some random crossover for less than $50, but the Kicker is a pretty decent piece.
With only one preout from your deck, a dedicated xover will take care of splitting the signal for each set of speakers and help when it comes to setting the gain levels on your amps. I haven't seen anything on the net that says you can't use the Legacy as a 2 channel amp, so there is probably a switch on it beside one pair of the input RCA's to feed the signal to all 4 of the channels, and the speaker terminals should show you how to hook up only 2 speakers.
HTH
#26
This is what I have planned for it all.
1st, get a cable converter, to convert the speaker wires comming from my deck to RCAs.
Next, get the Boss Audio BX35 Crossover. It has the 4 inputs, ( which will come from the converter ). And it also has 2 Sub inputs, which I will get right from the 2 RCA outputs from my deck.
From the crossover out to my amps, Legacy LA-290, and I am thinking the Legacy LA-1990 for my 2 Infinity 1250w.
1st, get a cable converter, to convert the speaker wires comming from my deck to RCAs.
Next, get the Boss Audio BX35 Crossover. It has the 4 inputs, ( which will come from the converter ). And it also has 2 Sub inputs, which I will get right from the 2 RCA outputs from my deck.
From the crossover out to my amps, Legacy LA-290, and I am thinking the Legacy LA-1990 for my 2 Infinity 1250w.
Thread
Thread Starter
Forum
Replies
Last Post
newbieboy
General Discussion
2
03-27-2008 06:15 PM
sirsleepsalot
General SQ
11
12-08-2007 01:29 AM
95Probite
General Discussion
9
07-24-2005 09:05 PM