subsonic canceling mids?
 

hi guys, i finally tested the setup that i was building all summer... the sw8200 sitting in about 2.5cuft (about cuz the box is curved so i cant rilly tell exactly)in my trunk picks up lows that distort/cancel my mids and partially highs... i was recommended to put some polly fill in the box so i can pick up even lover freq-( right now i can pick up 10-15Hz) is there any way of sealing the trunk or sealing the rear 6x9(as their back is exposed to the trunk) so i don't get that cancellation? or is it the eardrums that dont pick up anything at certain spl?... and is it good idea to go lower ???

Search for term VBA or Violent Bass Air.

This gentleman here has the same problem as you do.

Help designing enclosures for rear deck 6x9's. - DIY Mobile Audio

Well i reached the max thread limit but i got the idea of this thread being mostly jokes.... but i also learned that the cancellation can be fixed,,, i will try to make some boxes for those 6x9 but it will be extremely difficult as the magnets of the 6x9 are mm away from the top of the box :/.... thanks for advice tho

P.s. will it hurt to just make the boxes overly huge and one for both? (sealing the edge of the sub box with the rear panel that the 6x9 are attached to?

not trying to be a jerk but have you swapped phases on the woofer?

Nope ... 0 degrees phaseshift set for the sub... Should I ??

inverting the polarity of the sub might just help.

try some XTC foam baffles for the 6x9s. They're soft foam so they can fit around trunk lid springs but they work to isolate the drivers.

How do they look- where to buy them? Sorry just never heard of those that's all. And thanks for the reply

They are a medium density grey foam. Any install shop should be able to get them in. Many online shops have them as well such as parts-express and Crutchfield.

http://akamaipix.crutchfield.com/pro.../h237xt92p.jpg

manufacturer's site: VertekXTC

Crappy tire has something similar to that, just plastic tho, and kinda flimsy. woth a try tho i think.