mao

got a 92 gm single cab pickup in the shop, and we're trying to replace the back 4x6's...however the bolts at the base of the back pillar are seized bad...we've done everything from using a screwdriver up to an impact gun and a torch, they've also been soaking in lubricant for hours...already broke an extension and a bit (love that lifetime CT warranty)...any ideas on how to get either the bolts out or another way to get that pillar off?
thanks

Kinslayr

iTrader: (2)

Could always drill the center of the bolts out and use a reverse tap.

zzzzzzz

iTrader: (5)

heat it up or drill it out

Justin LaRouche

do u mean the torx head bolts that hold the seat belt retractors to the floor? which side are u heating up. i garanty that if you get them cherry red there is not a chance that those bolts will not come out i have had the same problem at least three or four times. hate those darn bolts. lol
oh ya and the side that u want to heat up is from the bottom side of the cab witch is probably what u are already doing.

[ September 16, 2005, 01:19 PM: Message edited by: Justin LaRouche ]

Lethal

You can just tear out the old speakers cone and surround and jam in a replacement like this guy did.

Kinslayr

iTrader: (2)

Wow, where the heck did you find that?

Justin LaRouche

some one came into your shop with that right joe! very nice.

Lethal

yeah. He did it himself and he thought it was awesome. I had to take the pics though.

Kinslayr

iTrader: (2)

Sheesh, thats a nasty *** job. Even a hack could do better.