Looking at + post of my battery and one 8 or 10 gauge is coming from the Alt and the other is "Fused then goes - car electrical components.

I'm running a 150amp ANL fuse to the audio section and the stock 80amp I'd like to re-wire the stock fuse with an MANL (unfortunately I only have a 60 and 100 MANL fuses) Can I install a 100 amp MANL fuse temporarily until I get the 80Amp?

I'll have photos in a few

Thanks in advance?

J

 

Don't fuse the wire leading from battery to alternator.

 

FusionMadsen thanks for the info - I wasn't doing that to begin with. My original post stated: The stock +'s have two going to the terminal. One is from the Alt(not fused) the other is going to the cars electrical components(80amp fused)

Can I install a 100 amp MANL fuse temporarily until I get the 80Amp fuse on the electrical side only?

 

photo is here since the photo uploader isn't accepting jpg's, gif or jpeg's ??

big3 on Flickr - Photo Sharing!

 

is the factory fuse broken? if not, then why are you replacing it?

yah you can put the 100 amp fuse in there, i just dont see why you'd do that if the one in there works?

 

Yuli I'm changing the terminal posts so it can accept two 8gauge inputs and two 2or0/1gauge inputs. It's a lightning audio battery terminal - I got a from S & S electronics for dirt cheap. The old terminal wouldn't accept 2 gauge let a alone 4 gauge a was hell to get on last year!

I'll post photos once the Kinetic battery is in today!

J

 

ok yah that makes sense. yes you can put the 100 amp fuse in there.