Install related Need a car audio install related question answered? Have a tip you want to share, post in here!

grounding issue?

Thread Tools
 
Search this Thread
 
Old Apr 29, 2006 | 10:54 AM
  #2  
scroudt111's Avatar
50 Watt CAFz'r
 
Joined: Apr 2006
Posts: 359
how is the battery grounded? Use the same guage wire from the frame to the battery, you could also do the same for the engine to the frame. Find a bolt on your engine and run the wire from there to the frame of your car, make sure you have slack so that when the engine tourqes it doesn't pull the wire off.

this may help out, if not it will help the current from your amp/s and engine anyhow.
Old Apr 29, 2006 | 10:59 AM
  #3  
hofulstrof's Avatar
500 Watt CAFz'r
 
Joined: Nov 2004
Posts: 779
i would try relocating the ground on the hu.
Old Apr 29, 2006 | 11:21 AM
  #6  
hofulstrof's Avatar
500 Watt CAFz'r
 
Joined: Nov 2004
Posts: 779
i really dont think relocating/romveing/replaceing the factory grounds is going to help at all.

im assumeing your speakers are ran off the hu. do you have an amp installed inyour car?
Old Apr 29, 2006 | 11:38 AM
  #8  
hofulstrof's Avatar
500 Watt CAFz'r
 
Joined: Nov 2004
Posts: 779
and which speakers doesn the noise come though?
Old Apr 29, 2006 | 11:47 AM
  #10  
hofulstrof's Avatar
500 Watt CAFz'r
 
Joined: Nov 2004
Posts: 779
so at one time you had the front speaker hooked off the deck and eveyrthing was fine . then you added the amp and got noise?.

are you power and rca cables ran side by side the amp?. i would try grounding that amp in a differnt location



All times are GMT -5. The time now is 06:26 AM.