Car Audio Forumz - The #1 Car Audio Forum

Car Audio Forumz - The #1 Car Audio Forum (https://www.caraudioforumz.com/)
-   Install related (https://www.caraudioforumz.com/install-related-17/)
-   -   HELP! DD Z1A 2x earth 2x power inputs why? (https://www.caraudioforumz.com/install-related-17/help-dd-z1a-2x-earth-2x-power-inputs-why-262484/)

Jzz30_DD 02-25-2012 12:18 AM

HELP! DD Z1A 2x earth 2x power inputs why?
 
Hi everyone I'm new to this forum, ive recently purchased a digital designs z1a amp (second hand so no manual with it) now my question is this, it has dual power and earth inputs, I've never had an amp like that, I've always only had amps with the 1 earth & power inputs, so I'm wondering do I have to use both? Can I use just one set? by set I mean 1xearth 1xpower, or if I have to use both can I use the same wire in both inputs, eg.run into distribution block then run 2x wires from it, and earth both out at separate points in the vehicle or should I put both earths in the same spot? Also it has 2+ Speaker output & 2- speaker outputs beside each other, it looks like this ++-- so im wondering can it be bridged to run 1 sub? Which + & - do I use? Or does it not matter? I was guessing the second + and the last -
+ + - -
^ ^---these ones, any help would be appreciated, also I run 0 gauge wire I only have 1 battery and a 4.4 farad cap, with stock altenator, thanks Mick

Jzz30_DD 02-25-2012 12:21 AM

EDIT: I meant + + - -
^ ^------these 2, I obviously would not join + to + lol

audio1der 02-25-2012 01:19 AM

It has dual + and - power inputs because of the MASSIVE current draw it will require when making big power at 1 or 2 ohms. Don't bother using a distribution block splitting 1 wire to 2; you need 2 dedicated runs to your batteries (note the plural) and 2 grounds, EACH with the largest wire that will fit in those terminals. As for the speaker output its much the same; you need all that wire capacity to run that much power to your subs. Both +s and -s are joined so it doesn't matter how you use them as long as your load presented to the amp is correct.

Jzz30_DD 02-25-2012 02:46 AM

So I do have to use both power & earth?, if I use just one set will it still perform ok? Thanks,

audio1der 02-25-2012 12:24 PM

I suppose you don't HAVE to, but they supplied 2 of each for a reason. If you're loading it down to 2 or 1 ohm, watch the temperature.

jeffdavies 02-25-2012 01:16 PM

What kind of power dos that amp have ?

(Sorry of the topic).

throatrattling 02-25-2012 01:16 PM

It's not really optional. USE BOTH SETS or you will smoke it.. if you don't want to use both sets sell it to me, thanks. :D

throatrattling 02-25-2012 01:17 PM

That amp will do 5K @ 1ohm.. more on good electrical

jeffdavies 02-25-2012 01:20 PM


Originally Posted by throatrattling (Post 664635)
That amp will do 5K @ 1ohm.. more on good electrical

Wow nice! thxs it puts my M1B to shame! lol


All times are GMT -5. The time now is 07:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands