Problem with Alpine KCA-410C Aux unit
#1
Problem with Alpine KCA-410C Aux unit
I just finished installing my system into my truck with a friends help but I am banging my head trying to figure out this problem. I can't get the KCA-410 to access any of the plugged in devices...(although it does recognize the changer..just won't play anything)
Headunit: Alpine iDA-X001 -I have adjusted the switch on the back of the iDA-X001 to EQ.
Feeds via AI-net cable to Alpine KCA-410C under rear seat of crew cab truck.
Plugged into the KCA-410C is a CHA-S634 Alpine 6 Disc Changer (via AI-net cable) It also has plugged into it the sirius sat radio (via RCA) and the overhead DVD player (via RCA)
Orginally in the box the KCA-410C comes with a shorter cable. Since I wanted to hook in the KCA-410C in the rear under the seat I used the longer cable supplied with the changer (CHA-S634). I then used the supplied KCA-410 cable to run to the changer (since it is mounted to the back wall).
The problem is I am unable to the changer to play. It recognizes the changer (and cycles through the discs under start up. However it does not jump to a disc when asked to and does not play a disc. I also can not access either of the RCA plugged in devices. This should be pretty simply plug and play being Ai-net but it is not for whatever reason.
Any idea or thought? Are the cables different for both these devices? I thought an AI-net cable was an AI-net cable but I am starting to wonder.
Any suggestions or help would be greatly appreciated.
Headunit: Alpine iDA-X001 -I have adjusted the switch on the back of the iDA-X001 to EQ.
Feeds via AI-net cable to Alpine KCA-410C under rear seat of crew cab truck.
Plugged into the KCA-410C is a CHA-S634 Alpine 6 Disc Changer (via AI-net cable) It also has plugged into it the sirius sat radio (via RCA) and the overhead DVD player (via RCA)
Orginally in the box the KCA-410C comes with a shorter cable. Since I wanted to hook in the KCA-410C in the rear under the seat I used the longer cable supplied with the changer (CHA-S634). I then used the supplied KCA-410 cable to run to the changer (since it is mounted to the back wall).
The problem is I am unable to the changer to play. It recognizes the changer (and cycles through the discs under start up. However it does not jump to a disc when asked to and does not play a disc. I also can not access either of the RCA plugged in devices. This should be pretty simply plug and play being Ai-net but it is not for whatever reason.
Any idea or thought? Are the cables different for both these devices? I thought an AI-net cable was an AI-net cable but I am starting to wonder.
Any suggestions or help would be greatly appreciated.
#3
Sorry..yes..the iDA-x001 is set to Normal. The unit recognizes the changer. It can shift disks between the changer but no sound. I am also not getting any sound out of either units plugged into the KCA-410c unit either. I am hoping the store can bring in another unit but as I am relocating to Ontario I am not holding my breath. It is either the KCA-410C or AI Cable I think.
Thread
Thread Starter
Forum
Replies
Last Post
autoworks
Car Audio Wanted (WTB)
1
12-20-2011 09:02 PM