sub hits greats then hits weak
09-07-2013, 09:55 PM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Sep 2013
Posts: 6
sub hits greats then hits weak
my system has problems, when my sub hits it does not stay cconsistent its like its losing power I have a 3.5 Farad cap and it drops all the way down to 10.4 don't make any since the subs is dual. 4 ohm at 600 rms wired to 2 ohms and the amp is one channel kenwood at 900 rms and the amp is all the way up I'm lost please help
09-08-2013, 06:58 PM
#5
With the amount of current draw that the amp is able to produce you don't need a cap for starters. Yes the "Big 3" is always an upgrade to any system with beneficial results.
You had mentioned the "amp is all the way up" do you mean the gain is at the max? if so that is a definite problem, are you running an aftermarket headunit if so what is it?
Was your system professionally installed? What guage of power and ground wire is being used? Where is the ground cable grounded to and how long is it?
You had mentioned the "amp is all the way up" do you mean the gain is at the max? if so that is a definite problem, are you running an aftermarket headunit if so what is it?
Was your system professionally installed? What guage of power and ground wire is being used? Where is the ground cable grounded to and how long is it?
Thread
Thread Starter
Forum
Replies
Last Post
