sunfire doors
#7
I am currently running a set of 6 1/2 in my sunfire, I had to make the adaptor out of MDF because the plastic adaptors didnt fit properly. 5 1/4 are a much better fit for the sunfire, but 6 1/2's will work fine if any good with a jigsaw. The problem with the 6 1/2's is that ack of the door panel will be close to speaker cone. I used 3/4 MDF and have no problems. lot of guys from j-body.org have had alot of luck with the infinity refrence series.
Last edited by Joshv06; 05-30-2007 at 04:03 PM.
#10
Again, any half decent installer can put a 6.5" driver in the door of a Sunfire with no problems. For the guy who was told a 5.25" was the biggest that could be fit in there he needs to get a new installer.
Putting the biggest drivers you can fit up front is rarely a bad thing.
Putting the biggest drivers you can fit up front is rarely a bad thing.