Tinted And Chris B Stroker installation help
#1
Ok guys heres the deal Plan on having 2 15 inch Cerwin vega strokers SVC 4OHM i want in a 1989 Z24 Cavalier The amp is arriving shortly Earthquake PHD2 Shredder what do you guys recommend on electrical system upgrades ect to run these puppies mabey someone would be willing to help me to do the install..... [img]smile.gif[/img]
#2
i'll help u with the install no doubt if u need any hand. One thing tho, that amp is a bad match for dual 4 ohm subs. with dual 4 ohm u can either get 1 ohm (which is danger zone for a phd2 if you daily drive it) or 4 ohm (which is only half the power of that amp), yes you can daily drive the amp at 4 ohm, but where is the fun when you can only use 1000rms? lol.
As for electrical system get a biggest battery that fits your car, for one phd2 4 gauge is enough, although i have two runs of 1/0 in my jeep from the battery straight into the amps.
ad me to your MSN if you have it, @hotmail.com and join my forum for more help at www.canadaspl.com
As for electrical system get a biggest battery that fits your car, for one phd2 4 gauge is enough, although i have two runs of 1/0 in my jeep from the battery straight into the amps.
ad me to your MSN if you have it, @hotmail.com and join my forum for more help at www.canadaspl.com
#5
also do you plan on competing with this, or do you just want a loud daily driver? I agree with yuli about everything except I'd do 1/0 gauge wire.. just because if you get it at the right place it'll be cheap and as for battery I would switch to a Hawker Odyssey 1200 (I know where to get them cheap if your interested) and my msn is barclay_c@hotmail.com
#6
Sorry bout that guys its a modded PHD2 shredder Stable from 4 all the way down to 1/2 ohm my Subs are single 4 ohm coils meaning a 2 ohm load on the amp 1000 watts per sub (heres the specs on my amp 1000 Watts 4 ohms 2000 at 2 ohms 3000 at 1 ohm and its half ohm stable) and chris i will add ya to msn cant wait to chat tinted whats yer msn????