what 5channel amp can give me what i need...
#1
what 5channel amp can give me what i need...
90X2 for front
60X2 for rear
at least 150X1 for sub
all RMS
which not-too expensive amp can get me this?
and i really would like the rear fill as i know a lot of folks here would say"just forget the rear speakers". Nope, i bought them and so i will use them. i dont mind an amp that can only give 80-90% of what is needed.
thanks
i found the Alpine v12 MRD f752 suits my needs, but i cannot even find it anywhere:ebay etc nowhere
here are the specs
Channel class T Amplifier
RMS power Channels 1-4 at 12V, 20Hz ∼ 20kHz:
4 x 75W @ 4 ohms (0.08% THD)
4 x 100W @ 2 ohms (0.3% THD)
2 x 200W @ 4 ohms bridge (0.3% THD)
RMS power Channel 5 at 12V, 20Hz ∼ 20kHz:
1 x 250W @ 4 ohms (12V - 0.3% THD)
Freq. Response: 20Hz ∼ 20kHz (+0,-1dB)
S/N Ratio: 100dBA (at rated power)
Fuse: 80A
Dimensions: 17.9" x 10.2" x 2.4" (46cm x 26cm x 6cm)
Weight: 18.5 lb. (8.4 kg.)
Manufactured in 1999-2002
anything similar will do
thanks for your suggestions guys.
60X2 for rear
at least 150X1 for sub
all RMS
which not-too expensive amp can get me this?
and i really would like the rear fill as i know a lot of folks here would say"just forget the rear speakers". Nope, i bought them and so i will use them. i dont mind an amp that can only give 80-90% of what is needed.
thanks
i found the Alpine v12 MRD f752 suits my needs, but i cannot even find it anywhere:ebay etc nowhere
here are the specs
Channel class T Amplifier
RMS power Channels 1-4 at 12V, 20Hz ∼ 20kHz:
4 x 75W @ 4 ohms (0.08% THD)
4 x 100W @ 2 ohms (0.3% THD)
2 x 200W @ 4 ohms bridge (0.3% THD)
RMS power Channel 5 at 12V, 20Hz ∼ 20kHz:
1 x 250W @ 4 ohms (12V - 0.3% THD)
Freq. Response: 20Hz ∼ 20kHz (+0,-1dB)
S/N Ratio: 100dBA (at rated power)
Fuse: 80A
Dimensions: 17.9" x 10.2" x 2.4" (46cm x 26cm x 6cm)
Weight: 18.5 lb. (8.4 kg.)
Manufactured in 1999-2002
anything similar will do
thanks for your suggestions guys.