just installed a 2.0 cap and ran new lightning 4ga wire and now my speakers are not working too well the subs really kick but not much sound.I have a R/F mono block for my subs and a earthqauke 4ch amp for my fill.Any ideas?


I have tryed everything i can think of and im really frustrated.Is there anyone in the GTA that can help me figure this out and tune my system while their at it?..

Let me know.

Thanks,Ed.

 

is the amp poweing up ?
is the power wire going to power (did you cut the power when you added the cap ?)


what have you tryed?

 

yeah have a look at wether or not the amp is powering up, if your stumped i can give you a hand on thursday evening around 6 or so or friday evening, im in the DVP/Steeles area

 

play around with the filter settings till it sounds good.

 

Thanks for the reply.Everything powers up,Both amps,cap,HU,EQ.I ran the 4ga power to the cap and then one 8ga from the cap to one amp and another 8ga power line from the cap to the other amp.Grounded the cap with 8ga and grounded the amps with 8ga.I have some sound from the fill speakers.
I am out of patience with this set up.....

Set up includes

2 10" R/F subs in a sealed box.
R/F 5x7 power series in the rear
R/F 6.5 comps up front
Pioneer premier H/U
Audio Art eq
R/F mono block
Earthquake 4ch
SPL 2.0 cap
Lightning power lines 4ga and 8ga.


Thanks for the input.

Ed.

 

time for new setup lol :P
someone will have an answer eventually

 

It is new.....LOL....I put all my money in the motor

 

Um i have a cuple questions for you

1,did your rear fill work before hooking up the cap

2,were they running off the 4 ch amp

3,did you happen to play with the HU settings at all when the cap was installed.

I know of alot of people that have installed caps,and for some reason put the fade all the way to the front.

If you say they did work before hand check your HU settings

also im in Port Hope if you need a hand one day

I also have a scope for setting the gains and some nice soft ware for tuneing systems.

 

I'm in Oshawa if you want a hand...

 

Thanks for all the replys and offers to help.....But i found the problem....My filter and gain was turned down on my 4ch amp... Working too much lately i guess....