Well I'm going to try and get a little more thump outta' my subs by making the switch from a sealed Bassworx box to a slot ported box, but I can't figure out these port calculators everyone is using!

Would someone be able to get me on the right track or even whip up some designs for me? They are two Rockford Fosgate P1S410 10'' subs, 150w RMS 300w Max with a Punch 300.1 amp. The Rockford site recommends 1.40cu. ft, and tuned to 37hz and that's about as far as I can make it cause everything else is a bit overwhelming. Either that or I'm too hungover to think haha.

 

What kind of music do you listen to?

What are your max dimensions?

Car its going into?

 

Rap, any thing with nice low bass. It's going into a 4 door cobalt, with a trunk that is 33'' wide at the top, 42'' wide at the bottom, 38'' long and 17'' tall.

 

2.9 cubic feet @ 37hz

Cut Sheet:

Top = 30"x17.5"
Bottom = 30"x17.5"
Front = 26.75"x13"
Back = 30"x13"
L Side = 16.75"x13"
R Side = 16"x13"
Port = 14"x13"

 

Ignor the 2nd image in my above post

 

Thanks a ton Jalat, I really appreciate the work! I'll get started on it right away and make sure I let you know how it works