hey guys. So this is one of my first fiberglass projects i did this summer:

And I am not sure how to correctly connect the fiberglass with wood (On the edges there is only fleece:

However inside there is about 6 layers of fiberglass cloth and I overlapped the wood from the inside, I'm just not sure if that will be enough and if i should maybe put layer or two on the fleece and the wood (just on the edge)- the problem with that will be i will have to level all of the walls by the thickness of the fiberglass that i will put on...

 

If you have it layered inside, that's all you need. You may get locallized peeling but, unless you are painting it, you'll never see it.