zzzzzzz

iTrader: (5)

IN the stock fuse box there maybe a fuse that is bad and does not look like it is bad

vip3r87

iTrader: (1)

i switched it with another fuse of the same size...same thing. I will have a better look at it though, as I might have missed something

zzzzzzz

iTrader: (5)

try a power wire off the battery

liv2ride

iTrader: (1)

WIll you crank it up to 40 again after you fix your problem ?!.

That probably damaged your subs with all that clipping too.. I would make sure that you wire the power to the deck straight from the battery and put a fuse, theres prob a hidden fuse in the stock wiring somewhere.

zzzzzzz

iTrader: (5)

this is what i'm trying to get at

vip3r87

iTrader: (1)

umm...well there was a fuse in the 12v line, and it was fine...but i also took the fuse out of the equation just to see, and it still didn't work. Where else would there be a fuse...I tried digging through the wires...and thats all I came up with. I am going in there right now with a voltmeter.

If I were to run a wire straight from the battery...do I just run..say, a 18awg wire? 10awg? and go straight to the 12v line?(with a fuse along the way ofcourse)

and no, I won't crank it to 40 again... was a stupid mistake on my part. But there was no clipping...it just shut off


thanks alot

BradSk88

10 or 12 gauge would be fine for 50W deck.

vip3r87

iTrader: (1)

okay, well multi-meter shows that the 12v line is only doing .1V lol. I am going to tap it into the fan control line, and then try my luck.


Thanks alot for all the great help!

vip3r87

iTrader: (1)

lol you should of warned me about the 12v line and saving memory on the HU itself, lol. Come tomorrow I am going to have to try and find a new 12v source to run it off of that is constant....trying the cigarette lighter? or should I just run a new wire?


Get back to me,

Thanks alot

BradSk88

Cigarette lighter is good.