Why My Woofers Shuts Down
03-06-2008, 08:28 PM
#21
link is broken : MTX Thunder Dual 12" Car Subwoofer (TCE512X2D) do a fast search at FUTURESHOP.ca
03-06-2008, 08:48 PM
#22
0 Watt CAFz'r
Thread Starter
Join Date: Mar 2008
Posts: 17
exactly jhonVroom my headlights dims wen bass hits hard...like mah lights r playing with song lol......and I took mah HID out a long time ago now i have normal lights.....still dims with base....and ya i jus bought mah battery like 2 months and its spiral grad HEAVY DUTY battery...mah battery is gud too.....
heres the link of woofers
http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10 085242&catid=
heres the link of woofers
http://www.futureshop.ca/catalog/proddetail.asp?logon=&langid=EN&sku_id=0665000FS10 085242&catid=
Last edited by burhangondal; 03-06-2008 at 08:49 PM. Reason: put the wrong link
03-06-2008, 08:53 PM
#24
0 Watt CAFz'r
Thread Starter
Join Date: Mar 2008
Posts: 17
and ya avidedtr i have the exact woofers and box the picture u posted...same no DIFFERENCE.....and ya i think i will have to go to futureshop to get it checked from a pro.....it could be wiring problem i think...
03-06-2008, 10:24 PM
#26
It might be easier to help if you didn't type like a fvcking retard....
I suggest you go to professional shop, because at this point I doubt anyone here can help you with advice over the internet...
ok today i took out the capacitor and now mah amp is direct connected to the car battery....however, its still doing the same thing....it shuts down and i m 200% sure that mah amp and woofers r gud and they dont have any fault.......again mah woofers r two 12s, 2ohm woofers and they r requierd total 600rms and mah amp is 800rms it should work....and ya i tried on three ground places in mah trunk and mah ground cable is 4g too and its realli small not even like 8 inches......mah amp still shuts down
......
now here i come on wat mah amp is set to.... i only three options on the bak......GAIN, BASE, LPF AS TOM.F.1 said......i didnt put GAIN to full its like a quater less to full...same with BASE....and mah crossover (LPF) frequency set in the middle or u can say normal......to be honest with u i HAVE NO IDEA wat the heck this thing LPF does so i didnt really touch it and put it on normal........i did try it today like ful and half and nothing....but again same problem amp shuts down when some heavy BASE song comes up......mah amp is MONO so only mah woofers r attached to it........
and one more thing.....is that FUSE could be the problem which spilts cable between amp and car battery?? cuz its right around the car battery for protection as u guys know more than me so u know wat that fuse does......i donoo i could be wrong cuz i havnt tried it yet but for some reason i think that could be the problem cuz weneva some heavy BASE song comes up then amp tries to get more power from battery(as its direct connected to the battery now) and that FUSE CUT the power between amp and battery? i donooo i m jus talkin in the air ritenow lol.....so any suggestions? And ya TOM.F.1 my LPF is on normal and plz tell me wat it use for? THANKSSS
......now here i come on wat mah amp is set to.... i only three options on the bak......GAIN, BASE, LPF AS TOM.F.1 said......i didnt put GAIN to full its like a quater less to full...same with BASE....and mah crossover (LPF) frequency set in the middle or u can say normal......to be honest with u i HAVE NO IDEA wat the heck this thing LPF does so i didnt really touch it and put it on normal........i did try it today like ful and half and nothing....but again same problem amp shuts down when some heavy BASE song comes up......mah amp is MONO so only mah woofers r attached to it........
and one more thing.....is that FUSE could be the problem which spilts cable between amp and car battery?? cuz its right around the car battery for protection as u guys know more than me so u know wat that fuse does......i donoo i could be wrong cuz i havnt tried it yet but for some reason i think that could be the problem cuz weneva some heavy BASE song comes up then amp tries to get more power from battery(as its direct connected to the battery now) and that FUSE CUT the power between amp and battery? i donooo i m jus talkin in the air ritenow lol.....so any suggestions? And ya TOM.F.1 my LPF is on normal and plz tell me wat it use for? THANKSSS
I suggest you go to professional shop, because at this point I doubt anyone here can help you with advice over the internet...
03-06-2008, 10:40 PM
#27
well man i live in new west if you want i can take a peak at it, and see if there is something obvious wrong or something that just doesnt sit right, also i may be able to ask more direct questions to the members not to mention its easier for me to keep an eye on things while you do whatever it is that makes it cut out....
03-06-2008, 11:43 PM
#28
0 Watt CAFz'r
Thread Starter
Join Date: Mar 2008
Posts: 17
HAUNZ I CAN USE THAT KINDA LANG ABOUT U TOO IF U WANT...I DON THINK IF U WANT THAT.....i came on this forum to get help and i donoo why this sucha nice forum have FVCKING RETARTED SUPPORTING MEMBER LIKE U HAUNZ.....thank u all the others guys to help me out i really appreciate that....i will get help from somewhere else or i will jus go to futureshop.....thanks for the offer jo-psyko.....Good Bye
03-07-2008, 12:53 AM
#29
LOL - SARNIA BOY - I MISS LIVING THERE? Where do you get your gear Pure Power or St.Clair?
03-07-2008, 09:23 AM
#30
Sorry burhangondal, but there could be numerous problems and posting painfully long barley intelligible paragraphs isn't going to help.
I asked a simple question, is the amp going into protection ?
If yes, is the overcurrent light flickering before this happens ?
If yes you have a bad power/ground connection or a short in the speaker wire or the subs tinsel leads....
If no then it's something else... say a bad RCA or an intermittent wire connection...
I asked a simple question, is the amp going into protection ?
If yes, is the overcurrent light flickering before this happens ?
If yes you have a bad power/ground connection or a short in the speaker wire or the subs tinsel leads....
If no then it's something else... say a bad RCA or an intermittent wire connection...
Last edited by Haunz; 03-07-2008 at 09:31 AM.
