Would this amp work with this Head Unit
Thank you

 

no, only designed to work with certain Alpine units from 2005 or later. The harness is designed to plug right into the head unit's harness. i suppose it could work, if you disected the harness and found what wire did what, and hard wired it to your head unit, but hardly worth the effort.

 

It's simple and easy to do, the colors match up on the harnesses

 

12V+ Constant - Yellow
12V+ Switched - Red
Ground - Black
Remote - Blue/White
Left Front Speaker Positive - White
Left Front Speaker Negative - White/Black
Right Front Speaker Positive - Gray
Right Front Speaker Negative - Gray/Black
Left Rear Speaker Positive - Green
Left Rear Speaker Negative - Green/Black
Right Rear Speaker Positive - Violet
Right Rear Speaker Negative - Violet/Black

that's the wiring just get the wiring of you vehicle/hu harness and Bob's your uncle

 

Cheers
I find this deck to be the best for me because of the burr-brown.

 

Hmm, selecting a radio becasue of burr-brown bits and then connecting it to that amp seems a bit of a contradiction. I would look for more power.