Bassworx SPL demo car enclosure
#1
Bassworx SPL demo car enclosure
I just built a pure SPL enclosure for the Bassworx Demo Car...
for the new Bassworx Series 4 SPL 12" woofers
his last set up was lacking....it hit only 147db
this one is WAYYYYYYYYYYYYYYYYYY louder..like I mean
much louder...they sound like 15's
1.0cf3 per sub plus port and sub dissplacement
common chamber tunned at 56hz with 101.75 sq inches of
port area
I'll take more pics after the cosmetics are done and the interior is
put back in...hopefully I will have a new DB score to go with the pics
crap is this set up LOUD!!!!!!!!!!!!!!!!!
he has 3000w rms running these suckers
for the new Bassworx Series 4 SPL 12" woofers
his last set up was lacking....it hit only 147db
this one is WAYYYYYYYYYYYYYYYYYY louder..like I mean
much louder...they sound like 15's
1.0cf3 per sub plus port and sub dissplacement
common chamber tunned at 56hz with 101.75 sq inches of
port area
I'll take more pics after the cosmetics are done and the interior is
put back in...hopefully I will have a new DB score to go with the pics
crap is this set up LOUD!!!!!!!!!!!!!!!!!
he has 3000w rms running these suckers
#5
the objective here is DB's.... fiberglass does not make DB's
once we get some numbers from the mic the cosmetics
will be finished up..the car is in Penticton today
this design is VERY LOUD. the angled baffle works very well
in this perticular install
once we get some numbers from the mic the cosmetics
will be finished up..the car is in Penticton today
this design is VERY LOUD. the angled baffle works very well
in this perticular install
Last edited by thumpper; 07-15-2007 at 10:07 AM.
#7
Originally Posted by Sub Sonic
the objective here is DB's.... fiberglass does not make DB's
once we get some numbers from the mic the cosmetics
will be finished up..the car is in Penticton today
this design is VERY LOUD. the angled baffle works very well
in this perticular install
once we get some numbers from the mic the cosmetics
will be finished up..the car is in Penticton today
this design is VERY LOUD. the angled baffle works very well
in this perticular install
i know the owner of that car lol, and yes fiberglass does make db's. Anyway i hope thats louder than the fusion subs he had.
#8
we did not even have a chance to test the box
out before he had it metered..we have no clue what
frequency it peaks out at yet......
with a sweep from 40hz to 60hz it hit 144db on a Termlab....
his last box hit 147db on a Audiocontrol..
the difference between an Audiocontrol mic and a Termlab
is about 8db or so....so it is a bit louder
we will play around with it a bit and
see if we can squeeze any more out of it
out before he had it metered..we have no clue what
frequency it peaks out at yet......
with a sweep from 40hz to 60hz it hit 144db on a Termlab....
his last box hit 147db on a Audiocontrol..
the difference between an Audiocontrol mic and a Termlab
is about 8db or so....so it is a bit louder
we will play around with it a bit and
see if we can squeeze any more out of it
#9
Originally Posted by Sassmaster
for a demo enclosure, I thought you'd make it prettier??
maybe stretch some glass between the baffle and the port and glass it and paint it to match the car?
maybe stretch some glass between the baffle and the port and glass it and paint it to match the car?
it never sounds as good as mdf and to make it so is prohibitive in cost curious tho whats the f3 of that enclosure in that car