Bassworx SPL demo car enclosure
Guest
Posts: n/a
Originally Posted by Sub Sonic
we did not even have a chance to test the box
out before he had it metered..we have no clue what
frequency it peaks out at yet......
with a sweep from 40hz to 60hz it hit 144db on a Termlab....
his last box hit 147db on a Audiocontrol..
the difference between an Audiocontrol mic and a Termlab
is about 8db or so....so it is a bit louder
we will play around with it a bit and
see if we can squeeze any more out of it
out before he had it metered..we have no clue what
frequency it peaks out at yet......
with a sweep from 40hz to 60hz it hit 144db on a Termlab....
his last box hit 147db on a Audiocontrol..
the difference between an Audiocontrol mic and a Termlab
is about 8db or so....so it is a bit louder
we will play around with it a bit and
see if we can squeeze any more out of it
the angle is just for looks....
and that is the inner cf3 and tunning Bassworx recommended...
I think they were smoking crack when they wrote the recommended
enclosure specks...
no biggie..it's only 35 bucks of MDF...
and that is the inner cf3 and tunning Bassworx recommended...
I think they were smoking crack when they wrote the recommended
enclosure specks...
no biggie..it's only 35 bucks of MDF...
Originally Posted by NTOXKTD
On a street set up the pressure sensor Audiocontrol and Termlab are about 1.5 db apart. If he is hitting 144 on the term lab i am sure he is hitting 146 at the most on the Audiocontrol.
My last time on both meters within the same day (at the Kingston show) .. I had about a 3db difference between the 2
Administrator
Joined: Feb 2006
Posts: 16,860
Originally Posted by Sub Sonic
the angle is just for looks....
and that is the inner cf3 and tunning Bassworx recommended...
I think they were smoking crack when they wrote the recommended
enclosure specks...
no biggie..it's only 35 bucks of MDF...
and that is the inner cf3 and tunning Bassworx recommended...
I think they were smoking crack when they wrote the recommended
enclosure specks...
no biggie..it's only 35 bucks of MDF...
You have defended the volume a few times as being 'factory recommended'. From what I have seen, 'factory' boxes are generally undersized and far from optimum. This may not be the case here but IMO 1cuft exactly seems pretty coincidental for any sort of optimum box.
What does your software say?
Originally Posted by Dukk
You have defended the volume a few times as being 'factory recommended'. From what I have seen, 'factory' boxes are generally undersized and far from optimum. This may not be the case here but IMO 1cuft exactly seems pretty coincidental for any sort of optimum box.
What does your software say?
What does your software say?
well it turns out nothing was wrong with the box....
he has an install issue with the wiring...the car was in Kamloops
last night getting metered on a Termlab
they changed enclosures and it was the same thing.
so he has to go over and double check all the wiring...
the DB's have dropped and the amp was cutting out
I should have some new numbers soon
he has an install issue with the wiring...the car was in Kamloops
last night getting metered on a Termlab
they changed enclosures and it was the same thing.
so he has to go over and double check all the wiring...
the DB's have dropped and the amp was cutting out
I should have some new numbers soon
