Box design for 2x12" Premiere 500rms
#1
Box design for 2x12" Premiere 500rms
Hey,
I have 2, pioneer premiere IMPP 12" subs, 1000watt max, 500watt rms each.
Dual 4 ohm voice coils.
Currently in a mass produced sealed box. Sounds ok, but now what i like or want.
I listen to alot of hip hop or heavy metal...
I want a ported box, as I much prefer the sound, and the rumble created by the air being pushed around the car.
I have a mazda tribute that they're in. Therefore I have roughly two feet deep, three feet height and three feet width roughly of trunk space available.
I'm not quite sure the frequency most desired, but any help would be appreciated.
As I stated, mostly hip hop music, Want a slot port box, and generally I like to seperate the air spaces, so each sub has it's own, acts on it's own, and therefore I can trouble shoot problems much easier if they occur.
Thanks in advance for everyones help
Edit: Powering the subs with a new JBL 1400.1, 1400watt rms mono block amp.
I have 2, pioneer premiere IMPP 12" subs, 1000watt max, 500watt rms each.
Dual 4 ohm voice coils.
Currently in a mass produced sealed box. Sounds ok, but now what i like or want.
I listen to alot of hip hop or heavy metal...
I want a ported box, as I much prefer the sound, and the rumble created by the air being pushed around the car.
I have a mazda tribute that they're in. Therefore I have roughly two feet deep, three feet height and three feet width roughly of trunk space available.
I'm not quite sure the frequency most desired, but any help would be appreciated.
As I stated, mostly hip hop music, Want a slot port box, and generally I like to seperate the air spaces, so each sub has it's own, acts on it's own, and therefore I can trouble shoot problems much easier if they occur.
Thanks in advance for everyones help
Edit: Powering the subs with a new JBL 1400.1, 1400watt rms mono block amp.
Last edited by GForceCustoms; 08-27-2012 at 07:32 PM. Reason: Additional information
#3
Hey, I found the specs!!
TS-W1241C :
Brand Pioneer
Manufacturer Part Number ts-w1241dvc
Nominal Power Handling Over 300 W
Surround Material Urethane
Nominal Power Handling 500 Watt
Size 12"
Power Handling 1000W (Peak), 500W (RMS)
Technical Features
Frequency Respond 15 Hz - 20,000 Hz
Impedance 8 ohm
Peak Power Handling 1000 Watt
Sensitivity 89 dB
...Sensativity = 88dB
...Freq Resp = 15 - 2,000
...Mag Wt. = 50 oz
...Displacement = .11 cu ft (3.11 liters)
...Recv = 3.0
...Levc (mH) (4 ohm) = 2.59
...Zmax (4 ohm) = 102.6
...Fs = 20
...Qms = 9.48
...Qes = 0.30
...Qts = 0.29
...Vas = 4.18 cu ft (118 liters)
...Rms (N*S/m) = 2.5
...Mms (g) = 186
...Cms(m/N) = 3.36x10^-4
...Diam (inch) = 9.9 (mm) 251
...Sd (sq in) = 76.8 (sq.m) 0.0495
...BL (T*m) (4 ohm) = 15.78
...Xmax (inch) = .36 (mm) 9.2
...Hvc (inch) = 1.20 (mm) 30.4
...Hag (inch) = 0.47 (mm) 12
TS-W1241C :
Brand Pioneer
Manufacturer Part Number ts-w1241dvc
Nominal Power Handling Over 300 W
Surround Material Urethane
Nominal Power Handling 500 Watt
Size 12"
Power Handling 1000W (Peak), 500W (RMS)
Technical Features
Frequency Respond 15 Hz - 20,000 Hz
Impedance 8 ohm
Peak Power Handling 1000 Watt
Sensitivity 89 dB
...Sensativity = 88dB
...Freq Resp = 15 - 2,000
...Mag Wt. = 50 oz
...Displacement = .11 cu ft (3.11 liters)
...Recv = 3.0
...Levc (mH) (4 ohm) = 2.59
...Zmax (4 ohm) = 102.6
...Fs = 20
...Qms = 9.48
...Qes = 0.30
...Qts = 0.29
...Vas = 4.18 cu ft (118 liters)
...Rms (N*S/m) = 2.5
...Mms (g) = 186
...Cms(m/N) = 3.36x10^-4
...Diam (inch) = 9.9 (mm) 251
...Sd (sq in) = 76.8 (sq.m) 0.0495
...BL (T*m) (4 ohm) = 15.78
...Xmax (inch) = .36 (mm) 9.2
...Hvc (inch) = 1.20 (mm) 30.4
...Hag (inch) = 0.47 (mm) 12
Thread
Thread Starter
Forum
Replies
Last Post
Roger @ CAFz
General Automotive News
0
12-13-2011 12:23 PM