still abit of work to be done on the ports, clean up, carpeting etc, box sits at 1.78cu ft each side and ported to 36hz with 30sq.in of port area for each side

 

thats sick man..

I'm working on a new box with angles, It's def different ! lol

 

thnx, it deffinatly takes some patience thats for sure, oh and alot of sanding to get things to fit just right haha

 

when you calculated your ports, did you like add 1.5" so the width and like that to accommodate the full area it takes up inside your box ?.. I'm finding that the hardest on my brain lol..

Looks dope man, I like it !

 

both actually i did inside and outside dimensions, 1st for port area /length, 2nd for displacement inside the box

 

that is a very nice box man i cant wrap my brain around all the angle measurements

 

What kind of subs are going in there?

 

fineshed pics, little bit of sanding left (until carpet arrives, 2 weeks )

 

2x pioneer 400/1000w / ts-w306c
running on an mtx tc8001 @ 2ohms / 856w rms
big 3 in ultrafine 0gauge / 6 farad cap

 

test fitting in the truck, temporary blocks built to support for measuring, wow.... next step. dynamat!!!!! roof flex is in the 2-3" range!!