Hows this box look
Hows this box look
For a BTL 18, walled in an Alero.
8 cf3 after displacements
36hz
18.8175 sqin of port per cube (150.54)
2k @ 1ohm
Should the port be on the passenger side, on the top of the box, or on the drivers side? Is that too much port area? Box is 49w x 16+1d x 28h. Port is 5.79w x 26h x 16d.
8 cf3 after displacements
36hz
18.8175 sqin of port per cube (150.54)
2k @ 1ohm
Should the port be on the passenger side, on the top of the box, or on the drivers side? Is that too much port area? Box is 49w x 16+1d x 28h. Port is 5.79w x 26h x 16d.
Daily for rap. The port calc says exactly 36hz, there are no wack decimals, it seemed like a good box because it's the max. space I can go, leaving 2-3" for cone clearance. I was going for 35hz. I don't know if I used the port calc right, I don't know if the L is the H and vice versa, it says 41.x and 36hz when I switch them.
Thread
Thread Starter
Forum
Replies
Last Post
King Dynasty
Canadian General Car Audio Discussion
32
Jun 17, 2005 06:57 AM
