kyleorsini

iTrader: (1)

this


into this


4.6 after all displacements tuned to 38 hz with 95 sq
for 2 12" spl drivers, going to be powerd with a orion 2500D@.5ohm

this was designed by LOWTONEZ, seems like a good guy to get designs from, very nice description on what to put together first, detailed cut sheet and sketchups, hopefully will get the box done in a couple hours, ill keep pics comin as i do progress

kyleorsini

iTrader: (1)

the craftmanship in the box isnt great, but w/e its all sealed
up which is the big thing, i had to stop cuz i snapped my predrill bit
and gotta buy a new one, and glue, and some bolts for terminals.

kyleorsini

iTrader: (1)

box is just about done, just gotta put the top on, and then put some threaded rod in for bracing, ports painted, not sure yet if ill keep it raw or carpet box or just paint it.

LOWTONEZ

iTrader: (3)

Looking good bud!!!

kyleorsini

iTrader: (1)

Thank u sir

kokopokoloko

nice!

bronson

Very nice !!!!!!!

vrdublu

iTrader: (5)

I would have put a cross brace in between the subs, you're going to get alot of flex there. Also doesn't look like you followed the plans completely as whoever designed it called for 2.25" front baffle and you have a 1.5" baffle. GL.Other then that looks ok

kyleorsini

iTrader: (1)

so thx for bringing back a thread that was 4 months old, but there wasnt any flex on the front as u say becasue i added threaded rod it just wasnt in the pics, and i dont know what your talking about baffle being 2.25 clearly theres 2 layers of wood there and a circle there to represent the sub being mounted on top but kay

vrdublu

iTrader: (5)

Ahahaha didn't even look at how old it was. I thought it looked like there's 3 layers of 3/4" mdf, at least I presumed that's what it was. Why threaded rod?? All you needed is a 3/4" x say 6" piece that mounted to the front baffle and went from top to bottom, you know the saying "KISS" usually works, kay.