patman_h

Hi,

I am looking for plans for a sealed enclosure for a DB Drive PT12D4

1.5 cu ft sealed. it has to fit in a sunfire trunk, so as long as it isn't ridiculously tall it should be fine. If anyone has any suggestions for software i would love to try it out too.

thanks

DeadlySones

iTrader: (4)

People use Win ISD, Bass Box 6 Pro, Termlab has some software, I'm sure there's others.....

Sikk Nation

iTrader: (1)

Serious.

1.5cu.ft = 2592 Cu.in internal volume. SO whetever the number you get, add 1.5" for the wood to the external measurement.

ex. If the box is 12" tall (internal) thenn you take the cu.in number and divide by 12.


2592/12=216

Now way you want the box 14.5" wide internal Divide the remainder by 14.5

216/14.5=14.9 This would be your depth in inches.

So Externally the box would be 14.5" Tall, 16" wide and 16.4 (16 and 3/8" deep)

Now that we've done the grade 8 math lesson for today let's discuss flowers ..

patman_h

thanks for the reply..

so i should make a rectangular box, with what thickness of wood? 1.5"? that seems quite thick? and the woofer is placed dead center on the front panel?

DeadlySones

iTrader: (4)

Use 3/4 MDF.

Sikk Nation

iTrader: (1)

You can place the woofer anywhere it fits technically,