Need Help Designing A box
#1
Need Help Designing A box
My Car is a 99 Acura 1.6 EL
My System so Far is as followed......
2 10inch Rockford P1 Subs
300W ea. with 150RMS ea.
Pioneer 760W AMP
1.2 Farad Cap
2 or 4 Gauage wire (not sure yet)
2 Pioneer front speakers
2 Kenwood Rear speakers
Monster RCA and all cables
Kenwood KDC-MP728 deck
Right now I have the subs in a Basworx Dual Top slotted ported box.
I am just starting to get into the custom car audio scene. and wont to do my whole trunk over the winter.
Any help will be greatly appricated
If you want you can email me at frank08@gmail.com
Thanks
My System so Far is as followed......
2 10inch Rockford P1 Subs
300W ea. with 150RMS ea.
Pioneer 760W AMP
1.2 Farad Cap
2 or 4 Gauage wire (not sure yet)
2 Pioneer front speakers
2 Kenwood Rear speakers
Monster RCA and all cables
Kenwood KDC-MP728 deck
Right now I have the subs in a Basworx Dual Top slotted ported box.
I am just starting to get into the custom car audio scene. and wont to do my whole trunk over the winter.
Any help will be greatly appricated
If you want you can email me at frank08@gmail.com
Thanks
Last edited by RKnight; 10-18-2009 at 09:00 PM.
#2
My Car is a 99 Acura 1.6 EL
My System so Far is as followed......
2 10inch Rockford P1 Subs
300W ea. with 150RMS ea.
Pioneer 760W AMP
1.2 Farad Cap
2 or 4 Gauage wire (not sure yet)
2 Pioneer front speakers
2 Keenwood Rear speakers
Monster RCA and all cables
Right now I have the subs in a Basworx Dual Top slotted ported box.
I am just starting to get into the custom car audio scene. and wont to do my whole trunk over the winter.
Any help will be greatly appricated
If you want you can email me at frank08@gmail.com
Thanks
My System so Far is as followed......
2 10inch Rockford P1 Subs
300W ea. with 150RMS ea.
Pioneer 760W AMP
1.2 Farad Cap
2 or 4 Gauage wire (not sure yet)
2 Pioneer front speakers
2 Keenwood Rear speakers
Monster RCA and all cables
Right now I have the subs in a Basworx Dual Top slotted ported box.
I am just starting to get into the custom car audio scene. and wont to do my whole trunk over the winter.
Any help will be greatly appricated
If you want you can email me at frank08@gmail.com
Thanks
I presume you mean to say you WANT to do your trunk over this winter. I'm sure people on the forum can help you thru it. Be it, wild fiberglass designs, or just your common slot ported enclosure, theres lots you can do.
BTW, outta curiousity, is that bassworx enclosure the one where you have to invert the woofers?
#5
I presume you mean to say you WANT to do your trunk over this winter. I'm sure people on the forum can help you thru it. Be it, wild fiberglass designs, or just your common slot ported enclosure, theres lots you can do.
BTW, outta curiousity, is that bassworx enclosure the one where you have to invert the woofers?
BTW, outta curiousity, is that bassworx enclosure the one where you have to invert the woofers?
Well yes I do plan to do a whole custom trunk. I already know how to do the fiberglassing, bondoing, and painting. and already got a planned almost sorted out for my trunk. This will be my first project and hopfully not my last. But first i just want to learn how to build a box properly for any subs i have to build for. I will take a picture of the bassworx box this week. and no the subs are not inverted in this box.
#6
Well yes I do plan to do a whole custom trunk. I already know how to do the fiberglassing, bondoing, and painting. and already got a planned almost sorted out for my trunk. This will be my first project and hopfully not my last. But first i just want to learn how to build a box properly for any subs i have to build for. I will take a picture of the bassworx box this week. and no the subs are not inverted in this box.
i've designed hundreads and built several enclosures for people here on the forum, so if you need a hand with the enclosure i'll be more than willing to help.
#7
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
ferguson621
Enclosure Design & Construction Help
1
09-23-2012 01:06 PM
fresh1
Enclosure Design & Construction Help
11
01-13-2009 04:44 PM
Zaccutt
Enclosure Design & Construction Help
7
09-28-2006 09:38 AM