Sub upgrade - box design question
Thread Starter
0 Watt CAFz'r
Joined: Nov 2010
Posts: 18
i have experience with both. running a pair of 10" SSD's off an AQ 2200 in a friends corolla, and it digs deep. The are tuned right @ 30hz each sub getting 1.15 cubic feet. Electrical is up to par yet, so gains are fairly low, but once that is taken care of it should be unreal.
depending on the car you have, and amount of space, will ultimately determine whether you should go 12's or 10's
either will be good though
depending on the car you have, and amount of space, will ultimately determine whether you should go 12's or 10's
either will be good though
If I have the space I'm going to stick with 12's. I will take your advice and go with just over 4ft^3 for the box. I'm pretty confident I have the space for it, just need to measure and figure out the shape I want and how I'm going to build it (outside the car then slide it in, or build it right in the car if it is too big)
Any good box design drawings for these?
cool,
If I have the space I'm going to stick with 12's. I will take your advice and go with just over 4ft^3 for the box. I'm pretty confident I have the space for it, just need to measure and figure out the shape I want and how I'm going to build it (outside the car then slide it in, or build it right in the car if it is too big)
Any good box design drawings for these?
If I have the space I'm going to stick with 12's. I will take your advice and go with just over 4ft^3 for the box. I'm pretty confident I have the space for it, just need to measure and figure out the shape I want and how I'm going to build it (outside the car then slide it in, or build it right in the car if it is too big)
Any good box design drawings for these?
if you can give me your maximum dimensions you have to work with, i can sketch up a design for you.
and its much easier to build the enclosure outside of the car first, rather than inside the car.
Thread Starter
0 Watt CAFz'r
Joined: Nov 2010
Posts: 18
Thanks for the help I really appreciate it!
Thread Starter
0 Watt CAFz'r
Joined: Nov 2010
Posts: 18
It's an 09 Cobalt. Quite a bit of space in the trunk. Only problem is getting the box IN, as the opening is quite small, so I'll have to measure the opening for the back seat to the trunk because that's the only way my current box fit in.
Thread Starter
0 Watt CAFz'r
Joined: Nov 2010
Posts: 18
Thread
Thread Starter
Forum
Replies
Last Post
hott-nix
Enclosure Design & Construction Help
15
May 26, 2007 03:18 PM
Vanilla Gorilla
Enclosure Design & Construction Help
12
Feb 14, 2005 05:47 PM
