who wants to help spec a box?
04-24-2007, 02:01 PM
#1
who wants to help spec a box?
Below are the specs for the sub I'm going to be getting this summer. I'm not the best at calculating the box diamentions and what not so I thought I'd let some pro's help me out.
I'd LIKE to try ported but space is at a premium for my car...
recommended ported is 2cu/ft tuned to 30hz
recommended sealed is 1.3cu/ft
Max width is 40"
Max height is 17"
width, prefer as small as possible
Qts: .45
Qes: .48
Qms: 7.48
Fs: 23.29 Hz
Re: 2.81
Vas: 55.79 L
Mms: 257 g
Bl: 14.81 T*m
SPL: 83.50 dB
Sd: 556 cm^2
Xmax: 28.75 (Physical Linear) mm
Voice Coil: 76MM mm
Magnet Width: 7.50"
Cutout Diameter: 12.00"
Mounting Depth: 10.05"
Weight: 45 lb
Total Height: 10.05"
Displacement: .12 ft^3
Outside Diameter: 13.00"
I'd LIKE to try ported but space is at a premium for my car...
recommended ported is 2cu/ft tuned to 30hz
recommended sealed is 1.3cu/ft
Max width is 40"
Max height is 17"
width, prefer as small as possible
Qts: .45
Qes: .48
Qms: 7.48
Fs: 23.29 Hz
Re: 2.81
Vas: 55.79 L
Mms: 257 g
Bl: 14.81 T*m
SPL: 83.50 dB
Sd: 556 cm^2
Xmax: 28.75 (Physical Linear) mm
Voice Coil: 76MM mm
Magnet Width: 7.50"
Cutout Diameter: 12.00"
Mounting Depth: 10.05"
Weight: 45 lb
Total Height: 10.05"
Displacement: .12 ft^3
Outside Diameter: 13.00"
Thread
Thread Starter
Forum
Replies
Last Post
jabs
Enclosure Design & Construction Help
9
03-30-2011 12:06 PM
Kwalsh24
Enclosure Design & Construction Help
6
09-21-2006 10:22 PM
bluetroll
General Discussion
7
09-21-2005 06:37 PM
