Any 12" DVC Sub suggestions?
Any 12" DVC Sub suggestions?
I just bought an Alpine mrp1000 amp. I'm running a 12" Clif Design 4 ohm sub in a custom box made for one 12". The amp pushes 600 watts at 4 ohms and 1000 at 2 ohms.
As you can appreciate I would like to try a 2 ohm sub for more punch.
I'd like to find myself a sub that would perform well with this amp. I listen to rock mostly and would like something tight.
Any suggestions as to what to look for?
As you can appreciate I would like to try a 2 ohm sub for more punch.
I'd like to find myself a sub that would perform well with this amp. I listen to rock mostly and would like something tight.
Any suggestions as to what to look for?
Stay 4 ohm if tight is the objective... The lower the impedance, the less "control" there is over the voice coil(s). The point of lower impedance is higher power output, but judging from your expectations, a 4 ohm load and a higher powered amp would be the solution... I am also assuming by more "punch" you mean SPL... Or output if you're unfamiliar with that term
Stay 4 ohm if tight is the objective... The lower the impedance, the less "control" there is over the voice coil(s). The point of lower impedance is higher power output, but judging from your expectations, a 4 ohm load and a higher powered amp would be the solution... I am also assuming by more "punch" you mean SPL... Or output if you're unfamiliar with that term

Well lets say I want more spl... what would you consider to be some of the more quality 12" dvc's for output?
1000W
Fi Q, Fi BL, SSA Icon
1500W
2005 RE XXX, Adire Brahma MKII
1750W
SSA XCON
... then you have Ascendant Audio, Treo, Image Dynamics, and a whole lot more.
Is the box ported or sealed? Airspace? Is it in a trunk?
Fi Q, Fi BL, SSA Icon
1500W
2005 RE XXX, Adire Brahma MKII
1750W
SSA XCON
... then you have Ascendant Audio, Treo, Image Dynamics, and a whole lot more.
Is the box ported or sealed? Airspace? Is it in a trunk?
The sub is in a sealed box. And it's in the trunk.
What's the power-handling of the Clif 12? I don't think you'll get much more SPL with +400W in a sealed box.
I suggest the Fi SSD (800W RMS) with the power-handling add-on's ($50), for $229 total + tax & shipping. Use a ported box.
Spl: 86.1dB 1W/1m
Sealed box: .7-1.2 cuft
Ported box: 1.8-2.5 cuft @ 33Hz
Displacement: 0.14cuft
D1 ohm (wiring into 1000W @ 2 ohm)
Fs: 30.1 Hz
Qts: .36
Vas: 36.5 (1.28898534 cuft)
Sealed:
.7 cuft = Q .6068 @ 50.74 Hz
1.2 cuft = Q .5185 @ 43.35 Hz
Sealed Subwoofer Speaker BOX DESIGN - Qtc Calculator
https://ssl.perfora.net/www.ficaraud...iew.shopscript
The next series, the Fi Q, is $244 with $70 in options available.
I suggest the Fi SSD (800W RMS) with the power-handling add-on's ($50), for $229 total + tax & shipping. Use a ported box.
Spl: 86.1dB 1W/1m
Sealed box: .7-1.2 cuft
Ported box: 1.8-2.5 cuft @ 33Hz
Displacement: 0.14cuft
D1 ohm (wiring into 1000W @ 2 ohm)
Fs: 30.1 Hz
Qts: .36
Vas: 36.5 (1.28898534 cuft)
Sealed:
.7 cuft = Q .6068 @ 50.74 Hz
1.2 cuft = Q .5185 @ 43.35 Hz
Sealed Subwoofer Speaker BOX DESIGN - Qtc Calculator
https://ssl.perfora.net/www.ficaraud...iew.shopscript
The next series, the Fi Q, is $244 with $70 in options available.
Last edited by Lord Huggington; Sep 3, 2010 at 10:14 PM.


