Bought an Audison LRx 1.400 amp
#11
Originally posted by dodgeram:
cool .I was miss informed ..........original specs said single 4 ohm .......... way to do your homework [img]smile.gif[/img]
cool .I was miss informed ..........original specs said single 4 ohm .......... way to do your homework [img]smile.gif[/img]
originally Ben Milne put a thread on soundillusions that the BIG 8 is a single 4ohm coil..
#12
Guest
Posts: n/a
http://forum.soundillusions.net/showthread.php?t=28560
yeah that's the place I got my bad specs from [img]smile.gif[/img]
good luck eh .......and don't be too hard on that poor e8a [img]smile.gif[/img]
yeah that's the place I got my bad specs from [img]smile.gif[/img]
good luck eh .......and don't be too hard on that poor e8a [img]smile.gif[/img]
#13
Originally posted by dodgeram:
good luck eh .......and don't be too hard on that poor e8a [img]smile.gif[/img]
good luck eh .......and don't be too hard on that poor e8a [img]smile.gif[/img]
Anyways, I have consistently bottomed out the sub, and I hear clattering from the cone hitting the spyder... I better lay off of it for a bit..
For some reason, the sub does not distort at all, but it just bottoms out...
Did that ever happen to your e8a ?
#14
Guest
Posts: n/a
no they don't seem to .............but I have a 30hz subsonic filter turned on ....... and I havn't been runing them full out as my panels and stuff rattle if I crank it too loud [img]smile.gif[/img]
oh and it's not for some reason [img]smile.gif[/img] ......... the motor has more travel than the suspension does so it bottoms out .......
oh and it's not for some reason [img]smile.gif[/img] ......... the motor has more travel than the suspension does so it bottoms out .......
#15
Originally posted by dodgeram:
oh and it's not for some reason [img]smile.gif[/img] ......... the motor has more travel than the suspension does so it bottoms out .......
oh and it's not for some reason [img]smile.gif[/img] ......... the motor has more travel than the suspension does so it bottoms out .......
I would beleive that it is...
no ?
#16
Guest
Posts: n/a
T / S Parameters
Qts : 0.44
Qes : 0.49
Qms : 3.89
Vas : 10.89L
Sd : 0.0190 m^2
XMag : 17.7 mm
XSus : 16.5 mm
XMax : 16.5 mm
MMd : 103.85 g
Re : 1.53 ohm
Fs : 33.38Hz
Bl : 8.32
here's the specs ..... xmag (motor travel) is 17.7mm .........xsus(suspension travel) is 16.5mm
so as you can see the motor can travel roughly 1mm more than the suspension
I don't know if it's a flaw per se. they know about it ......... I was warned not to drive mine too hard or what your experiencing would happen [img]smile.gif[/img]
but yeah I like a woofer with more suspension travel than motor travel .... it protects the sub from me
Qts : 0.44
Qes : 0.49
Qms : 3.89
Vas : 10.89L
Sd : 0.0190 m^2
XMag : 17.7 mm
XSus : 16.5 mm
XMax : 16.5 mm
MMd : 103.85 g
Re : 1.53 ohm
Fs : 33.38Hz
Bl : 8.32
here's the specs ..... xmag (motor travel) is 17.7mm .........xsus(suspension travel) is 16.5mm
so as you can see the motor can travel roughly 1mm more than the suspension
I don't know if it's a flaw per se. they know about it ......... I was warned not to drive mine too hard or what your experiencing would happen [img]smile.gif[/img]
but yeah I like a woofer with more suspension travel than motor travel .... it protects the sub from me
#18
Originally posted by dodgeram:
so as you can see the motor can travel roughly 1mm more than the suspension
[/QB]
so as you can see the motor can travel roughly 1mm more than the suspension
[/QB]
Shouldnt a speaker distort before the cone reaches the spyder ?
#20
First of all these amps are hard to come by..I dont want car audio peices that everyone else has..I will pay a bit extra for something that is rare + high end ! Just like anything else.
so tell me, what are these amps going for then ?
so tell me, what are these amps going for then ?