Component speaker question

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2004 | 06:22 PM

#11

lemonlime

500 Watt CAFz'r

Joined: Jul 2003

Posts: 756

Same here, I like to keep the midbass highpass at below 80Hz. Helps if you have a steep slope too.

Feb 16, 2004 | 07:15 PM

#12

2 8's AKA Jeepbeats

Thread Starter

4000 Watt CAFz'r

iTrader: (19)

Joined: May 2001

Posts: 5,644

Thanks guys, I have Brown-Breaded my doors, they are mounted to a 3/4" MDF piece, it is very solid. DUKK I trhink I tried running the deck HP at 80hz, and the HP X-Card at 60hz, will this cause any conflict, or will the combined crossover slope be alright? What I mean is, is it ok to run 80 and 60 as the crossover points combined? If so, I will try that. Thanks!

Feb 16, 2004 | 11:30 PM

#13

Dereck Waller

Guest

Posts: n/a

Running two different crossover points is fine, basicall at the first point it will drop at the slope of that frequency, then when it hits the second frequency the slopes will sum. For example if we assume the slopes are 12 dB per octave at 80 hz the frequency response will drop at 12 dB per octave then at 60 hz the slope will become 24 dB per octave.