Done WOOT
12-28-2005, 04:08 PM
#1
50 Watt CAFz'r
Thread Starter
Join Date: Nov 2004
Posts: 351
well guys.. thnx for all your help.. I now have a second amplifier installed and everything is pretty much running perfect. The only 1 little thing I notice is that now when i fade to the fronts on the deck there is no sound comin from the fronts.. but when i have everything centered and no fading I get all the sound. Is this because im using a second amp and going through that ones rca output instead of the deck? or is it just because im not using the front / rear speaker wire anymore?
12-28-2005, 08:28 PM
#2
i would like to look at it be for say too much
what/how is the rca come form ?
is it a sub out on the deck ?
if so you need to go back in
i would get a wire in/out rca and run the set up that way
i think if the authers on this site sat in your car thay would ask you what/how do you have this set up done
if you taped in to the sub out you will not have your high notes [img]graemlins/freak.gif[/img]
[img]graemlins/dunno.gif[/img]
what/how is the rca come form ?
is it a sub out on the deck ?
if so you need to go back in
i would get a wire in/out rca and run the set up that way
i think if the authers on this site sat in your car thay would ask you what/how do you have this set up done
if you taped in to the sub out you will not have your high notes [img]graemlins/freak.gif[/img]
[img]graemlins/dunno.gif[/img]
12-28-2005, 11:34 PM
#3
50 Watt CAFz'r
Thread Starter
Join Date: Nov 2004
Posts: 351
Well The setup is pretty much
I have the rears being powered by the deck.. the fronts are being powered off the new amp.. the sub is being powered by the existing amp. I have 1 set of rca preouts on the deck so I have them goin to the first amp and since it has rca out it's sending them to the other amp. The second amp's gains are set properly and its high passed and the other amp is low passed for the sub... Everything sounds mint.
I have the rears being powered by the deck.. the fronts are being powered off the new amp.. the sub is being powered by the existing amp. I have 1 set of rca preouts on the deck so I have them goin to the first amp and since it has rca out it's sending them to the other amp. The second amp's gains are set properly and its high passed and the other amp is low passed for the sub... Everything sounds mint.
12-29-2005, 01:42 PM
#4
Guest
Posts: n/a
Decks with ONE set of RCAs generally designate them as REARs. This is why when you fade forward you have nothing - your rear speakers are off the REAR speaker leads and both you amps are off the REAR RCAs.
hint: If you want to get fade back so you can fade out the rears, put the back speakers on the FRONT speaker outputs from the deck. Your fader will now operate backwards but it will work.
hint: If you want to get fade back so you can fade out the rears, put the back speakers on the FRONT speaker outputs from the deck. Your fader will now operate backwards but it will work.
Thread
Thread Starter
Forum
Replies
Last Post
Lspade69
General Discussion
1
05-31-2006 11:46 PM
