Helix vs RF
#1
I'v never really heard of Helix before and my friend was offering me a good deal on it.
Im thinking of getting rid of my MMATS LM2075 amp and getting a more powerfull replacement to take its place.
Helix 400MKII
Rated output per channel @ 4 Ohm: 4 x 70 Watts
Rated output per channel @ 2 Ohm: 4 x 125 Watts
Rated output per channel bridged @ 4 Ohms: 2 x 250 watts
Frequency response: 20-20KHz
THD: <0.009%
TIM: <0.016%
S/N: >100dB
Input Impedance: 10kOhms
Input Sensitivity: 250mV-7.1V
Fuses: 2 x 25A
Dimensions (H x W x L) in mm: 31.5 x 200 x 336
Weight: 2.6kg
Rockford Fosgate Power 450S
RMS Power @ 4 Ohms: 2 x 112 Watts
RMS Power @ 2 Ohms: 2 x 225 Watts
Bridged Power: 1 x 450 Watts
Bass Boost 0-18dB
Bass Boost Frequency 45Hz
Channel Operation 1/2
Harmonic Distortion 0.05%
Signal-to-Noise 100dB
Frequency Response 20-20KHz
Low-Pass Crossover Frequency 50-250Hz
Low-Pass Slope 24dB
High-Pass Crossover Frequency 50-250Hz
High-Pass Slop 24dB
[ February 02, 2004, 03:58 PM: Message edited by: The Professor ]
Im thinking of getting rid of my MMATS LM2075 amp and getting a more powerfull replacement to take its place.
Helix 400MKII
Rated output per channel @ 4 Ohm: 4 x 70 Watts
Rated output per channel @ 2 Ohm: 4 x 125 Watts
Rated output per channel bridged @ 4 Ohms: 2 x 250 watts
Frequency response: 20-20KHz
THD: <0.009%
TIM: <0.016%
S/N: >100dB
Input Impedance: 10kOhms
Input Sensitivity: 250mV-7.1V
Fuses: 2 x 25A
Dimensions (H x W x L) in mm: 31.5 x 200 x 336
Weight: 2.6kg
Rockford Fosgate Power 450S
RMS Power @ 4 Ohms: 2 x 112 Watts
RMS Power @ 2 Ohms: 2 x 225 Watts
Bridged Power: 1 x 450 Watts
Bass Boost 0-18dB
Bass Boost Frequency 45Hz
Channel Operation 1/2
Harmonic Distortion 0.05%
Signal-to-Noise 100dB
Frequency Response 20-20KHz
Low-Pass Crossover Frequency 50-250Hz
Low-Pass Slope 24dB
High-Pass Crossover Frequency 50-250Hz
High-Pass Slop 24dB
[ February 02, 2004, 03:58 PM: Message edited by: The Professor ]
#3
if you wallet permits id suggest the Helix as well pretty much a no brainer in terms of power output at 4 ohms bridged.... you gonna use your passives for the comps so you'd get 250 x 2 at 4 ohms... twice the power of the RF amp...
Plus the helix is so much sexier [img]graemlins/thumb.gif[/img]
you even have enough power to probably go active on your setup
Kriston
Plus the helix is so much sexier [img]graemlins/thumb.gif[/img]
you even have enough power to probably go active on your setup
Kriston
#8
Originally posted by DaZZ:
definitely go for the helix... i believe that one retails for almost 600 US...
is there a dealer for helix in canada?
definitely go for the helix... i believe that one retails for almost 600 US...
is there a dealer for helix in canada?
Give our Canadian Rep a call for directions to an authorized dealer in your area:
Audissy Distribution
In the calgary area call Bryan So at (403) 561-8980
or in the Edmonton area call Bill So at (780) 913-1968
#9
Originally posted by DaZZ:
definitely go for the helix... i believe that one retails for almost 600 US...
is there a dealer for helix in canada?
definitely go for the helix... i believe that one retails for almost 600 US...
is there a dealer for helix in canada?
Bryan So
Thread
Thread Starter
Forum
Replies
Last Post