How to take GM 93 Grand Am back seats out temporarily

Reply Subscribe

Thread Tools

Search this Thread

Jun 14, 2004 | 03:34 PM

rajadesi

Thread Starter

0 Watt CAFz'r

Joined: Aug 2003

Posts: 49

My box is to big to fit through the trunk. Im thinking of bringing the box in through the back. The problem is ive never taken out the seats and dont know how to. The seats dont fold down. Can someone please tell me how to temporarily take out the seats?

Jun 14, 2004 | 03:38 PM

Dereck Waller

Guest

Posts: n/a

There is probably a metal brace in the way. Might have to build the box in the trunk.

Jun 14, 2004 | 03:41 PM

Beater Truck

50 Watt CAFz'r

iTrader: (1)

Joined: Jun 2003

Posts: 272

phone or goto a dealer ship and ask them how to take the seat out. usually one of the parts of the seat are held in by clamps and the other is bolted to the frame.

Jun 14, 2004 | 03:44 PM

Dereck Waller

Guest

Posts: n/a

Generally you remove the bottom first either clips (push towards the back and pull up) or 1/2" bolts under neath on each side. The the back rest will be bolted underneath that. Then just slide the back seat up to disengage the hooks near the top. Like I said though, with a non folding seat there is generally alot of support metal back behind that.

Jun 14, 2004 | 04:22 PM

Orion_95

2000 Watt CAFz'r

Joined: Jun 2001

Posts: 3,260

^yep...id bet money there is steel bracing blocking the part behind the seat. You can probably see it from inside the trunk, if you pull back the trunk liner.

Jun 14, 2004 | 05:30 PM

rajadesi

Thread Starter

0 Watt CAFz'r

Joined: Aug 2003

Posts: 49

on the inside of the trunk all u can see is the back of the seat. nothing else there?

Jun 14, 2004 | 05:52 PM

Dereck Waller

Guest

Posts: n/a

Can you see the foam of the seat or is there an upholstered panel. If there is upholstery I would bet it's a trim panel covering the metal behind the seat.